ND-210523I
Test programs for ND-100/110/120.
 |
This article is a stub. You can improve NDWiki by expanding it. |
Description
The product contains test programs for the ND-100/110/120 CPUs, memory systems, and ND-100 type interfaces and peripherals.
Changes since previous version
The programs DISC-TEMA, DISK-MM, SCSI-TV and UNIVERS-DMA has been modified.
The programs DISC-MM and SCSI-TV are now also running online and has additional functionality. DISC-MM is now able to format SCSI disks not delivered by ND. The program DISC-TEMA has been modified and a lot of errors have been corrected. The program UNIVERS-DMA has been updated due to an ECO.
Prerequisites
The following are required in order to use this product.
Hardware
The following hardware must be present for this product to be used.
CPU type (any of the following):
- 100 Standard
- 100 CX
- 110 Standard
- 110 CX
- 120 Standard
- 120 CX
Floating format: any
Software
The following software must be installed on the system for this product to be used:
Operating system:
Stand-alone programs, or SINTRAN III VSE/VSX
SINTRAN III VSX, version L for DISK-MM, SCSI-TV online use.
Documentation
Included (distributed free with product)
- Test Program Description for ND-100/ND-110 Norsk Data Document ND–830005.3 EN Test Program Description for ND-100/ND-110
- Test Program Description for ND-100/ND-110 - Addendum Norsk Data Document ND–899159.1 EN Test Program Description for ND-100/ND-110 - Addendum
PD- or PI-sheet:
- 895076.2A EN Product Information for ND-210523
Installation
Loading procedure - stand alone
The machine must be in STOP. Press MASTER CLEAR and type 1560& on console.
If autoload is not disabled (see description of FLOPPY-MON-H), TPE-MONITOR will start up and give the prompt:
TPE>
Manual loading:
FLOPPY-MON-H02 *LOAD TPE-MON-100
When TPE-MONITOR is started, use the command LOAD-PROGRAM to load the desired program:
TPE>LOAD-PROGRAM <program name>
or just:
TPE><program name>
The program is loaded if no error messages appear.
To list the programs available on diskette, use the command LIST-FILES:
TPE>LIST-FILES <file-name>
Online installation
The TPE-MONITOR can execute under SINTRAN in different modes.