STOP-SYSTEM

From NDWiki
Revision as of 09:20, 22 September 2017 by Tingo (talk | contribs) (created STOP-SYSTEM page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search 
@STOP-SYSTEM

Stop the system.

Rules: Rules:

  1. Permitted only for user SYSTEM.
  2. All hardware registers are saved before the system goes into stop mode.
  3. The system can be restarted by pressing the RESTART button on a NORD-10 (20! on ND-100) on the operator's panel. On restart logged in users can continue their programs. No start up procedure is necessary and no information is lost.
  4. To turn off the system for a longer period:
    1. Log out all users (preferably)
    2. Press STOP and MASTER CLEAR

Related commands

References

Norsk Data Document ND–60.128.03 SINTRAN III REFERENCE MANUAL (printed February 1983), page 1-210

Norsk Data Document ND–60.174.Q01 SINTRAN III QUICK REFERENCE CARD

Retrieved from "https://www.ndwiki.org/index.php?title=STOP-SYSTEM&oldid=4335"