ND-211998A
X Window System for ND-500/5000.
 |
This article is a stub. You can improve NDWiki by expanding it. |
Description
The X Window system is a portable, network transparent window system originally developed at M.I.T. It can be used on a wide variety of raster display devices, ranging from simple monochrome frame buffers to deep, true colour graphics processors.
This is a port of X Window System X11.R3 for ND-500/5000 series running on the SINTRAN III operating system.
The product contains compiled/linked versions of most of the clients and utilities normally contained in the X11.R3 distribution. The clients available are uwm, xterm, xclock, xcalc, xmag, xlogo, xbiff, bitmap, atobm, bmtoa, xsetroot, xev, xfd, xlsfonts, xlswins, xdpyinfo, xrdb, xmodmap, xset, xwininfo, xwd, xwud, xpr, maze, xhanoi, puzzle, ico and plaid. No X Window System display server is currently available under SINTRAN.
Prerequisites
The following are required in order to use this product.
Hardware
Computer: ND-500 or ND-5000 Other hardware
- ND-110063 Ethernet II Controller for TCP/IP (ND-500 or ND-5000 series)
- ND-110513 Ethernet III Controller (MF-BUS) (ND-5000 series only)
Software
Operating system: SINTRAN III/VSX, version L, revision 2000 or later Other software
- ND-211185 COSMOS TCP/IP Gateway, version C07
or
- ND-211327 TCP/IP Basic Module III, version B05
Notes: In order to run the X Window System with maximum performance it is necessary to have a TCP/IP Basic module running in an Ethernet III controller. Although it is possible to use an Ethernet II controller with the COSMOS TCP/IP Gateway, this is not recommended.
Running X Window System clients generally makes heavy demand on memory. It may thus be necessary to increase memory capacity.
Documentation
PD- or PI-sheet:
- Program Description ND-211998A.pdf[1]
Manual(s):
- none
Installation
Date
Date of release, production, revision.
Date: 1990.10