ND-10076J

Pascal for ND-100.

Description

Compile and execute Pascal programs.

This article is a stub. You can improve NDWiki by expanding it.

Prerequisites

The following are required in order to use this product.

Hardware

NORD-10 or ND-100 computer.

Software

Operating system: SINTRAN III VS

Documentation

PD- or PI-sheet

• Program Description ND-10076J (10076J.pdf)

Manuals

• Norsk Data Document ND–60.124.5 ND-PASCAL USER'S GUIDE

Installation

Files

To install the Nord Pascal system, the following files are needed

1. PASCAL-COD The Pascal compiler in BRF format.
2. PASCAL-LIB or PASCAL-2LIB The Pascal run-time library in BRF format. PASCAL-LIB is used with one-bank code, while PASCAL-2LIB is used with two-bank code.
3. PASCAL-ERR The compile-time error messages in symbolic form.

Installation procedure

1. Copy PASCAL-LIB to a system file named PASCAL-LIB:BRF. Copy PASCAL-2LIB to a system file named PASCAL-2LIB:BRF.
2. Copy PASCAL-ERR to a system file named PASCAL-ERR:SYMB
3. The Pascal compiler runs as a two-bank program. Be aware that a terminal running the compiler or two-bank Pascal programs must have 128K user segments.

To dump the PASCAL compileras a re-entrant subsystem, enter the following commands. The commands marked (o) are optional; when the compiler prints a source program, it will by default print 60 (decimal) lines per page. To change thius number, enter the

*DEFINE LINPP n

command (remember that 'n' must be octal). The

*DEFINE NOBUF 4

command will set the number of files being buffered to 4. This will give better performance when programs with $INCLUDE commands are compiled.

SINTRAN version H:

    @NRL
    *IMAGE-FILE 100
    *SIZE 1500
    *SET-LOAD-ADDRESS 24000
(o) *DEFINE LINPP n
(o) *DEFINE NOBUF 4
    *LOAD PASCAL-COD PASCAL-2LIB
    *VALUE PASCAL
    xxxxxx
    *VALUE CONTINU
    yyyyyy
    *DUMP "PASCAL:PROG" xxxxxx yyyyyy
    *EXIT
    @DITAP "PASCAL" PASCAL
    @DUMP-REENTRANT PASCAL,xxxxxx,yyyyyy,PASCAL

SINTRAN version I or later:

    @NRL
    *IMAGE-FILE 100
    *SIZE 1500
    *SET-LOAD-ADDRESS 24000
(o) *DEFINE LINPP n
(o) *DEFINE NOBUF 4
    *LOAD PASCAL-COD PASCAL-2LIB
    *VALUE PASCAL
    xxxxxx
    *VALUE CONTINU
    yyyyyy
    *DUMP "PASCAL:PROG" xxxxxx yyyyyy
    *EXIT
    @DUMP-REENTRANT PASCAL,xxxxxx,yyyyyy,PASCAL

The installation is now complete, and the system can be used according to the user manual.

Date

Date of release, production, revision.

Date: 1984.02.07

Media

Images

Images (made with dd) of 5.25 inch floppies.

Other

Patches

Patch to PASCAL-J:PROG to make it work under SINTRAN III version J:

              NEW     OLD
143060/SAA 0  170400  153262
MON 262       153262  124003
MON 0         153000   44005
LDA * 004      44004  146142
COPY SL DP    146142  146104

Date: 1987.09.21