ND-10325C
Jump to navigation
Jump to search
Test programs No. 2 for ND-10, ND-12 and ND-100.
 |
This article is a stub. You can improve NDWiki by expanding it. |
Description
Test programs for CPU, memory, discs and peripherals.
Test programs
- 100-ERRCOR
- Error correction ND-100
- CACHE
- Hardware test for cache
- CARDR
- Card reader test program
- DS1172
- Univ. DMA interf. S1172
- DSERV
- Utility for CDC discs.
- ECCTEST
- Test ECC controller
- ERRCOR
- Error correction logic.
- FLOATING
- Floating instructions
- FLOPPY-FU
- Test interface, functions.
- FOUR-CHECK
- Check Internal interrupts.
- ONE-CHECK
- Instruction check ND-10.
- PAGING
- Paging test program
- PARAL-BYTE
- Tests interface ND-653
- PFAIL
- Check powerfail restart
- PFAIL-12
- Tests powerfail on ND-12
- PROCES-PAN
- Check process panel
- RGCHK
- Check the register block
- RTC-12
- Test real time clock
- SMALL-RAND
- Random test on 10 Mb disc
- T-32B-FLOA
- 32 bit floating instr.
- TECOD
- Test 10 Mbyte disc.
- THREE-CHECK
- Test programmed interrupt
- TLINE
- Synch. modem interface.
- TREPU
- Tape reader and punch
- TWO-CHECK
- Instruction check
Prerequisites
The following are required in order to use this product.
Hardware
NORD-10, NORD-12 or ND-100 machine.
Software
Standalone programs. No other software required.
Documentation
PD- or PI-sheet:
- Program Description ND-10325C (10325C.pdf)
Manual(s):
- Norsk Data Document ND–30.005.02 TEST PROGRAM DESCRIPTIONS
Installation
Insert floppy in floppy disc controller 1, unit 0. Press Master Clear, type 1560& and LOAD <program>.
Date
Date of release, production, revision.
Date: 1983.02.16
