3013

3013, 8 terminal interface, component side

3013, 8 terminal interface, solder side

3013, 8 terminal interface, card edge

3013 is the 8 terminal interface board. A card with interfaces for 8 serial connected terminals, using RS-232 or current loop interface.

This article is a stub. You can improve NDWiki by expanding it.

Switches and indicators

The following switches and indicators are on the card

Location 21J - baud-rate selector, group A
Location  9J - baud-rate selector, group B
Location  6J - device-number selector, group B
Location  3J - device-number selector, group A

The baud rate switches sets the initial speed setting for each interface group. Baud rate switch settings

• 0 - 110 baud
• 1 - 150 baud
• 2 - 300 baud
• 3 - 2400 baud
• 4 - 1200 baud
• 5 - 1800 baud
• 6 - 4800 baud
• 7 - 9600 baud
• 8 - 2400 baud
• 9 - 600 baud
• 10 - 200 baud
• 11 - 134.5 baud
• 12 - 75 baud
• 13 - 50 baud

Setting 14 and 15 is not used. In addition there is one switch for each interface that selects the mode of the interface:

• switch set to 0: current loop
• switch set to 1: RS232-C (V24)

References

Norsk Data Document ND–06.026.01 ND-110 Functional Description