ND-110 Satellite 9883.21005

From NDWiki
Revision as of 20:34, 12 July 2016 by Tingo (talk | contribs) (→‎History: added more history entries)
Jump to navigation Jump to search

A ND-110 Satellite machine that I got from Gandalf.

Hardware

Hardware in the machine is described in this section.

Cards

  1. empty
  2. 3094 ETHERNET IF. II - print: E, eco: G
  3. 3095 ND110 CPU&MM 4BB, print: , eco: J
  4. 3201 SCSI/FLOPPY, print: C, eco: J
  5. 3042 N0100 2MBY RAM, print: B, eco: D
  6. empty
  7. 3013 N0100 8 TERM IF, print: M, eco: N

Devices

  • floppy drive : 1.2 Megabytes, 5.25 inch, ND 103161, another label says ND 187-3104.
  • tape streamer : Tandberg TDC 3640, ND 229-0898, SCSI.-id: 1.
  • Hard drive : Quantum ProDrive LPS 540 S, a 3.5 inch slimline SCSI drive, 540 Megabytes. SCSI-id: 0.

Power Supply

  • Wiener DN 03, 390 W

Connectors

  • power connector : IEC type C16
  • console connector : DB25F

Labels

On the inside of the front door

  • printed label at the top
NORSK DATA
FLOPPY: 187-3044
STREAMER: 229-898
  • handwritten label near the bottom
ORD: 20.6578 E
CPU: 9883.21005

On the front of the cabinet (behind the front door)

  • printed label above tape streamer / floppy drive
LOGNR
9053

History

2016-07-09
testing - I connected up the console again, and inserted the floppy labeled "210523E00-XX-01D Test Programs for ND-100 release date 870715 870108". On the console I wrote
MACL
1560&

(the last one without enter), and few seconds later the console prints 

    TPE Monitor, ND-100 / ND-110 - Version: A02 - 1986-10-30

The command HELP gives you the full list of available commands

TPE>

available commands are 

MODE <input file name> <output>
DATCL
DELETE-MACROS
DUMP-PRINTER-BUFFER (<from> <to>)
EXIT
EXPLAIN-COMMAND <command>
HELP <command>
LIST-FILES <file name>
LIST-MACROS <macro name>
LOAD-PROGRAM <file name>
DEFINE-MACRO <name> <body>
MONITOR-HELP <command>
OPCOM
PRINT-NOTE <note-number>
PROGRAM-HELP <command>
PROGRAM-STATUS
SET-CONSOLE-DEVICE-NUMBER <logical or hardware number>
SET-PRINTER-DEVICE-NUMBER <logical or hardware number>
SET-PRINTER-MODE <mode> (<buffer size>)
SET-TERMINAL-TYPE <type>
TERMINAL-MODE <full page stop>
UPDAT <minute> <hour> <day> <month> <year>

let me check the panel clock 

TPE>datctl
1985.03.09 04:55:07

update it 

TPE>updat 49 16 09 07 2016

check 

TPE>datcl
2016.07.09 16:49:43

that worked.

2016-07-02
testing - I connected power, used the Nokia VDU 301 S as a console (I just soldered up a new current loop cable). When I turn the keyswitch to on, the machine starts up and "STOP" and "START" lights up on the front panel. The console prints "#" - everything looks ok.
2016-06-30
the machine got delivered by Gandalf and friend, all the way from Umeå, Sweden. A Nokia VDU 301 S terminal also came in the same delivery.
2016-06-28
Gandalf had set up a rescue trip to Norway (to save a NORD-1), and graciously donated a ND-110 Satellite to me. The machine didn't have a hard drive, but use a SCSI hard drive. A friend in Tromsø made floppy images for SINTRAN III, M-release (M05) available to me.

References

Retrieved from "https://www.ndwiki.org/index.php?title=ND-110_Satellite_9883.21005&oldid=3151"