ENTER (command)
Revision as of 20:58, 26 September 2013 by Tingo (talk | contribs) (→References: added reference to SINTRAN III Reference Manual)
@ENTER <user name>, <password>, <project no>, <max time>
This command must be the first command in a batch job. It identifies the owner of the job.
- <user name>
- must be the name of a legal user
- <password>
- is the correct password for the user. If no password is defined, two commas (,) must be used to separate <user name> and <project no>. The password will not be printed on the output listing.
- <project no>
- should be given as a decimal integer if the accounting system is in use by the installation. If no project number is required, the entry should be given as two commas separating <password> and <max time>.
- <max time>
- is the maximum CPU minutes the batch job requires, given as a decimal integer. If the time is reached, the batch job is aborted. Default time is 1 minute.
If the <user name> or <password> is not valid, the batch job will be aborted.
The ENTER command is ignored when running @MODE. this means the the same file can be used for @MODE as well as batch.
References
Norsk Data Document ND–60.128.01 SINTRAN III REFERENCE MANUAL (printed June 1980), pages 1-70, 1-71
Norsk Data Document ND–60.050.06 SINTRAN III USERS GUIDE section 3.7.5.1
Norsk Data Document ND–60.174.Q01 SINTRAN III QUICK REFERENCE CARD