IOSET

@IOSET <logical unit> <read/write> <program> <control>

This command can be used to set an I/O-device in a given state.

<logical unit> identifies a device, which must be reserved (opened) beforehand.

<read/write> is 0 (zero) for input part and 1 (one) for output part (of device).

<program> must be 0 (zero).

<control> has different meaning for different devices but generally -1 means "reset device". See also .

References

Norsk Data Document ND–60.050.06 SINTRAN III USERS GUIDE section 3.3.13