Documentation list-Software

This is a compilation of documentation about software mentioned in the Norsk Data Documentation Catalogue. Links to online resources and references to where copies of the documentation recide should also be included. Known documentation locations is in the library list.

Documentation List

60-62 : General software

ND-60.031 QED USER MANUAL

This is a users guide and reference manual for the QED text editor. QED is designed for maintain source code but could be used for general text editing.

40 Pages.

ND-60.037 SCIENTIFIC SUBROUTINE PACKAGE

The Scientific Subroutine Package is a collection of mathematical routines for FORTRAN. In includes functions for statistical and mathematical calculations, matrix manipulation, integration, root finding and more. This manual describes the various subroutines and is written for programmers.

288 Pages.

ND-60.041 NORD IDT GERTS-115 OPERATOR'S GUIDE

This manual describes the functions of the ND IDT GERTS-115. It is an operator's guide and contains information about starting and running the system. It includes load instructions for various systems including SINTRAN III.

30 Pages.

ND-60.046 TRACE ROUTINE

TR is a program that makes it possible to run other programs one instruction at a time. This manual describes how to trace programs and simulate IOT commands. Written for programmers and system operators.

16 Pages.

Versions : TRACE ROUTINE

 11/74 ND-60.046.01   First printing
    84 ND-60.046.02   Second printing

Availability :

• A copy is located on the Bitsavers website.
• Göran have original and scanned but no pdf yet. (ND-60.046.02)

ND-60.047 NORD PL USER'S GUIDE

This manual describes the NORD PL language. It is written in the form of a textbook. It contains language definitions, compiler commands, error messages and exercises. Written for programmers and system operators.

102 Pages.

Versions: July 1977.

Availability :

• A copy is located on the Bitsavers website.

ND-60.050 SINTRAN III USERS GUIDE

This manual describes the SINTRAN III operating system. Written for all users.

320 Pages.

ND-60.051 SINTRAN III REAL TIME LOADER

This manual describes the commands of the Real Time Loader. Written for experienced users.

72 Pages.

ND-60.057 THE DATA BASE SYSTEM SIBAS I USER'S MANUAL

This manual describes original SIBAS system. It describes the implementation of a data base system, parameters, programming techniques and commands. Written for programmers and supervisors. SIBAS is replaced by SIBAS II, see Norsk Data Document ND–60.127 THE DATABASE SYSTEM SIBAS II USER'S MANUAL .

370 Pages.

ND-60.058 NORD PLOT PACKAGE

This manual documents the library routines in the Plot Package. The Plot Package is used to drive drum incremental plotters. Calls from FORTRAN, BASIC or MAC programs are described. Written for programmers.

46 Pages.

ND-60.060 NORD IDT DCT-2000 OPERATOR'S GUIDE

This manual is an operator's guide to the ND IDT DCT-2000 terminal. It describes local commands, starting up procedures and loading.

25 Pages.

ND-60.061 NORD IDT 200-USER OPERATOR'S GUIDE

ND IDT 200-USER is a remote batch terminal used to connect to CDC Cyber/6000 series computers. This manual is an operator's guide and describes commands, start up procedures and batch processing.

30 Pages.

ND-60.062 SINTRAN III SYSTEM DOCUMENTATION

This is the main documentation for SINTRAN III. Written for maintainer of the SINTRAN III software.

240 Pages.

ND-60.066 ND RELOCATING LOADER

This is a users guide and contains a general introduction to loading and descriptions of the NRL commands, overlay mechanism and the Binary Relocatable Format (BRF). Written for ND-10/100 programmers.

59 Pages.

Availability :

• A copy is located on the Bitsavers website.

ND-60.067 NORD IDT 3780 OPERATOR'S GUIDE

The ND IDT 3780 is a remote batch terminal operating with IBM 360/370 systems. This manual describes start up and batch processing. It is written as a user guide describing procedures for NORD-20, NORD-10/20/100 stand alone systems and systems running SINTRAN III.

25 Pages.

ND-60.070 NORD IDT NTR USER'S GUIDE

The ND IDT NTR is a program system for remote batch communication with a Univac 1100-series computer. This user's guide describes start up and running the system, features and commands.

40 Pages.

ND-60.071 NORD-10 BASIC COMPILER REFERENCE MANUAL

This is the reference manual for BASIC programmers. It could be used as a self study guide. It describes the basics of programming and a complete description of all commands. No previous programming experience is needed.

236 Pages.

ND-60.072 SINTRAN III REAL TIME LOADER SYSTEM DOCUMENTATION

This is a description of implementation of the Real Time Loader. It is written for system programmers, some familiarity with the SINTRAN III Real Time Loader is needed.

40 Pages.

ND-60.075 NORD-50 ASSEMBLER

This is a reference manual for NORD-50 assembler. It contains information about operating procedures, assembler directives, macro usage and external program representation. Included appendixes covers instruction tables, BRF directives and numerical opcodes. Written for users of the NORD-50 assembler. A detailed explanation of the instruction set is given in the Norsk Data Document ND–05.003 NORD-50 REFERENCE MANUAL .

52 Pages.

ND-60.076 NORD-50 MONITOR USER'S GUIDE AND SYSTEM DOCUMENTATION

This is a guide to the monitor and the architecture of the NORD-50. Chapter 1-3 covers the monitor and how to run NORD-50 programs. Available commands is covered, including commands reserved for the system supervisor. How to do file access and monitor calls is also included. Chapter 4-6 describes the monitor architecture. This manual is aimed to NORD-50 users. Additional recommended manuals are SINTRAN III Timesharing/Batch guide ND-60.132 and NORD-50 FORTRAN Reference Manual ND-60.095.

92 Pages.

Continue here ... Page 52 (dscn0549.jpg)

ND-60.077 SIBINTER

Versions: December 1976.

ND-60.085 BRF Editor

This manual gives instructions on how to modify and maintain BRF files. It is written for personell maintaining libraries of relocatable modules. Some knowledge of the BRF format is required and can be found in the ND Relocating Loader Manual ND-60.066.

6 pages.

ND-60.102 ND FILE-EXTRACT Utility Command User's Guide

This manual describes the commands of the FILE-EXTRACT utility program. This manual is included in Data Management Utilities ND-60.157.

28 pages.

ND-60.113 NORD-500 ASSEMBLER REFERENCE MANUAL

This is a reference manual for the NORD-500 assembler. It describes the ND-500/5000 assembly language, assembly directives, expressions and macros, and a short introduction to ND-500 instruction operands and addressing modes. Two example programs in ND-500 assembly are also included. Instructions (not including '87 extensions) and operands are listed in appendices. The binary assembly output NRF format is not described in this manual.

Related manuals: The Norsk Data Document ND–05.009 NORD-500 REFERENCE MANUAL is required for the complete definition of instructions and operands/addressing modes.

100 pages.

ND-60.121 PED USER'S GUIDE

Versions: June 1983.

ND-60.127 THE DATABASE SYSTEM SIBAS II USER'S MANUAL

Versions: Revision 2 September 1981, Revision 3 February 1983.

ND-60.137 FOCUS SCREEN HANDLING SYSTEM REFERENCE MANUAL

Versions: July 1982.

ND-60.139 NOTIS-1 Brukerveiledning

This is the same manual as NOTIS-1 User's Guide but in Norwegian.

50 pages.

ND-60.147 ND-500 PASCAL Compiler User's Guide

This manual describes the differences between standard PASCAL and ND-500 PASCAL. It also describes compiler usage and error codes.

48 pages.

ND-60.151 SINTRAN III UTILITIES MANUAL

This document describes the following SINTRAN III utilities/subsystems (as of version 02 of the document):

• GPM - General Purpose Macro Generator
• PERFORM - Flexible handling of batch- and MODE files
• BACKUP-SYSTEM - Backup to removable media. The tape format used by BACKUP-SYSTEM is also documented here.
• LOOK-FILE - File inspection and patch tool
• FILE EXTRACT - Extract records from files
• JEC - Job Execution Control
• MAIL - Messaging system (Unix equivalent: talk+wall)
• VTM-COMPOUND - Add new terminal types to the system

Around 140 pages.

• Copy in the Teg collection.

ND-60.156 NOTIS-1 Håndbok

This is a Norwegian version of the ND-60.155 NOTIS-1 Reference Manual. It was planned to be released in the end of 1981.

ND-60.157 Data Management Utilities

This is a collection of a number of different manuals. The following manuals are included.

• ND-60.099 FLOCON User's Guide
• ND-60.102 ND FILE-EXTRACT Utility Command User's Guide
• ND-60.107 DATACON User's Guide
• ND-60.126 MAGTAPE-LISTER PROGRAM User's Guide

ND-60.172 THE DATA BASE SYSTEM - SIBAS II NORD Users Manual

The manual describes the function, administration and programming of the SIBAS data base system. This manual is written for programmers, administrators and people interested in data base management systems.

Circa 249 Pages.

Versions :

• Version 01 : february 1980, replaces the Norsk Data Document ND–60.057 THE DATA BASE SYSTEM SIBAS I USER'S MANUAL
• Revision A : july 1980
• Version 02 : september 1981

Availability :

• Copy in the Teg collection.

ND-60.174 SINTRAN III QUICK REFERENCE CARD

Availability :

• ND-60.174.1 : Original in the Teg collection (scanned version here).

ND-60.186 FORTRAN CONVERTER

This manual describes version A of the ND FORTRAN CONVERTER (ND-10605A), a tool which translates programs written in non-ND FORTRAN to ND FORTRAN 77.

It is written for system analysts and experienced programmers with a good working knowledge of Fortran.

Index:

• Starting the FORTRAN CONVERTER
• Non-ND syntax handled by the FORTRAN CONVERTER
• Syntax constructs not handled by the FORTRAN CONVERTER
• Examples

Approximately 50 pages.

Versions:

• Version 01 - Preliminary. February 1984
• Version 02 - March 1984

ND-60.196 BRF-LINKER USER MANUAL

This manual is written for programmers and it describes the ND-10721A BRF-Linker. It's used in the time-sharing mode. For loading real time programs, see Norsk Data Document ND–60.051 SINTRAN III REAL TIME LOADER .

82 Pages.

Availability :

• A copy is located on the Bitsavers website.

ND-60.197 ETHERNET BASIC SOFTWARE PROGRAMMERS GUIDE

This manual describes Ethernet. It is written for system programmers.

100 pages.

ND-60.198 ND-ADA USER GUIDE

This manual describes the ND-Ada and how to use it on ND-500.

100 pages.

ND-60.203 ABM USER MANUAL

This manual describes ABM, a fourth generation Application Building and Maintenance system.

147 pages.

ND-60.204 THE DATA BASE SYSTEM - SIBAS II NORD Users Manual

The manual describes the function, administration and programming of the SIBAS data base system. This manual is written for programmers, administrators and people interested in data base management systems.

Circa 249 Pages.

Versions :

• Version 01 : february 1980, replaces the Norsk Data Document ND–60.057 THE DATA BASE SYSTEM SIBAS I USER'S MANUAL
• Revision A : july 1980
• Version 02 : september 1981

Availability :

• Copy in the Teg collection.

ND-60.204 DIALOGUE INTRODUCTION

This seems to be a later version of the previous manual. It gives an overview of the DIALOGUE system and is meant to be used as a guide to the DIALOGUE Example. Written for programmers who have experiences with data bases.

100 pages.

ND-60.206 UNIQUE-II USER MANUAL

This is the manual describing the UNIQUE-II, a fourth generation software development tool. The manual is non-technical and written for users of the system, it doesn't describe how to create a UNIQUE-II system.

60 pages.

ND-60.207 ND-500 BASIC USER MANUAL

This manual describes the ND-500 BASIC language. It also lists the differences between ND-100 and ND-500 BASIC. There are more than 70 examples highlighting the features available in ND-500 BASIC.

139 pages.

ND-60.208 ND-500 SIMULA REFERENCE MANUAL

This manual describes the ND-500 SIMULA.

210 pages.

ND-60.209 IBM 3780/2780-II EMULATOR USER GUIDE

70 pages.

ND-60.210 UNIQUE-II PROGRAMMERS GUIDE

130 pages.

ND-60.213 FILOVERSIKT INTRODUKSJON

50 pages.

ND-60.214 CC-100 AND CC-500 C-COMPILER ND-100/500 USER MANUAL

115 pages.

ND-60.215 FILE MANAGER INTRODUCTION

50 pages.

ND-60.220 ND COLOURED BOOKS USER GUIDE

115 pages.

ND-60.223 CTI COLOUR TERMINAL INTERFACE USER GUIDE

30 pages.

ND-60.224 DDPP MANUAL

140 pages.

ND-60.227 COSMOS X.25 PROGRAMMERS GUIDE

55 pages.

ND-60.228 SINTRAN III Monitor Calls manual

This manual describes the monitor calls defined in SINTRAN III. It is written for programmers and system operators.

ND-60.230 SINTRAN III J-VERSION RELEASE INFORMATION

72 pages.

ND-60.230 SINTRAN III K-VERSION RELEASE INFORMATION

174 pages.

Versions:

ND-60.230.3 SINTRAN III Release Information K version, May 1987

ND-860230 SINTRAN III Release Info. L-version

72 pages.
Versions :

• ND-860230.6 SINTRAN III Release Info. L-version, 1989

Availability :

• A copy exists in the Teg collection
• Also available online

ND-60.234 XCOM EXTENDED COMMAND PROCESSOR

80 pages.

ND-60.236 ND-100/500 SORT-MERGE USER GUIDE

85 pages.

ND-60.239 TELEFIX-MINI REFERENCE MANUAL

29 pages.

ND-60.240 UNIQUE UNIQUICK USER MANUAL

40 pages.

ND-60.241 APPENDIX TO SIFT USER GUIDE

26 pages.

ND-60.255 Introduction to ND Office Systems

The manual describes the most important Office Support Systems from Norsk Data. The manual is written for everyone who wants to know more about the Office Support Systems.

149 pages.

ND-60.264 SINTRAN III User Guide

The manual describes SINTRAN III in basic terms. It is written for the general user to help him in his daily work.

170 Pages.

Versions :

• ND-60.264.1.NO : Norwegian original text
• Version 01 : april 1987

Availability :

• Copy in the Teg collection.

ND-60.353 OpenLAN TIU Getting Started Guide

Availability :

• ND-860353.1 EN : Original in the Teg collection (scanned version here).

ND-60.362 S-Link Handbok

This manual describes the S-Link product, a program module installed on a PC/XT/AT IBM compatible computer used for communication with Norsk Data mini computers. The connection could be either by serial or a local network. One appendix contains drawings for a serial cable between a PC and a ND computer.

76 Pages.

Versions :

 09/89 ND-860362.1 SV  First version in Swedish

Availability :

• A copy exists in the Teg collection
• Also available online

61 : NORTEXT software

ND-61.009 NORTEX-100 AD SYSTEM OPERATOR'S MANUAL

62 pages.

ND-61.011 NORTEX-100 AD SYSTEM SYSTEM SUPERVISOR

140 pages.

ND-61.021 NORTEX ALDIS BRUKERMANUAL

106 pages.

ND-61.022 NORTEXT ALDIS SYSTEMDRIFTS-ANSVARLIG

96 pages.

ND-61.028 NORTEXT-100 EDITING TERMINAL (NET) REFERENCE MANUAL

50 pages.

ND-61.029 NORTEXT-100 FUNCTION CODES REFERENCE MANUAL

70 pages.

ND-61.030 NORDTEX-100 TYPOGRAPHIC MAINTENANCE AND UTILITY PROGRAMS REFERENCE MANUAL

80 pages.

ND-61.031 NORTEXT-100 SYSTEM MAINTENANCE AND UTILITY PROGRAMS REFERENCE MANUAL

95 pages.

ND-61.032 NORTEXT-100 TYPESETTER MODULES REFERENCE MANUAL

70 pages.

ND-61.034 NORTEXT-100 STRING-TO-STRING TRANSLATION REFERENCE MANUAL

60 pages.

ND-61.035 NORTEXT-100 COMMANDS REFERENCE MANUAL

80 pages.

ND-61.036 NORTEXT-100 COMMANDS HYPHENATION REFERENCE MANUAL

40 pages.

ND-61.040 NORTEXT ADIS BRUKERMANUAL

74 pages.

ND-61.041 NORTEXT ADIS SYSTEMDRIFTS-ANSVARLIG

76 pages.

ND-61.042 NORTEXT-100 PROPLAN REFERENCE MANUAL

298 pages.

ND-61.043 NORTEXT-100 REPORTER TERMINALS REFERENCE MANUAL AND USER GUIDE

60 pages.

62 : software

ND-62.008 NORD-50 TEST SYSTEM

This manual describes the test programs used o test a NORD-50 CPU. It is written for field test engineers and technical personnel maintaining NORD-50 CPUs.

43 pages.

63 : NOTIS software

ND-63.006 NOTIS-IR BRUKERVEILEDNING

Versions: June 1983.

ND-63.011 NOTIS-ID INTRODUCTION

Comes in English, Norwegian, Swedish and Danish versions.

ND-63.026 NOTIS-CALC BRUKERHÅNDBOK

Versions: November 1983.

Other Software

ND-820026 DOMINO and NUCLEUS Software Guide

This manual contains two distinct parts: Monitoring and using DOMINO I/O controllers, and how to use the NUCLEUS message-passing library.

Index:

• DOMINO Operation - a description of the DOMINO concept
• DOMINO Monitor - a tool to debug and maintain DOMINO I/O controllers
• DOMINOS - a description of the on-board operating system on DOMINO controllers
• NUCLEUS Overview - a description of the NUCLEUS communication library
• NUCLEUS library - a description of the NUCLEUS library functions
• PLANC Programming example - server/client code samples
• Error handling in NUCLEUS - warnings and failures
• NUCLEUS Monitor - a tool to inspect tables and queues in NUCLEUS
• Appendices

The manual is written for maintenance personnel and system developers.

283 pages.

Versions:

ND-820026.1 EN : Version 1 September 1988

References and sources

• Norsk Data Document ND–40.004.02 Documentation Catalogue
• Norsk Data Document ND–40.004.06 Documentation Catalogue