NLZ

NLZ
Description	Normalize (integer to floating)
Format	NLZ <scaling>
Code	151 4008
Affected	(T), (A), (D)
Type	User
Architecture	ND-100, ND-110

NLZ is an assembly instruction. It converts the number in the A register to a standard form 48-bit floating point number in the floating point accumulator (T, A and D registers), using the scaling of the NLZ instruction as a scaling factor.

The scaling is given to the conversion of -128 to 127 (approximately 10^-39 to 10³⁹).

For integers, a scaling factor of +16₁₀ will give a floating point number with the same value as the integer. A larger scaling factor will result in a higher floating point number. Because of the single precision fixed point number, the D register will be cleared.

Example

• NLZ+20 (code 151420) Convert from integer to floating point.

NLZ on 32-bit floating point CPUs

The ND-100/110 can have a 48-bit floating point CPU (standard configuration) or a 32-bit floating point CPU (customer option). For 32-bit floating point operations NLZ works as described above, except that the T register is not affected. This can also be used to test for 48-bit vs. 32-bit CPUs. The method is described in Norsk Data Document ND–06.029.01 ND-110 Instruction Set p.72:

SAT 0           ; Set T register to zero (INSTRUCTION-B test program uses 'COPY 0 DT')
SAA 1           ; Set A register bit one
NLZ 16          ; Normalize with scaling factor 16 decimal
; Test if T is changed (non-zero). If so, the CPU is 48-bit, otherwise it is 32-bit.

References

• Norsk Data Document ND–06.014.02 ND-100 REFERENCE MANUAL pages 120, 144, 146 and 240
• Norsk Data Document ND–06.029.01 ND-110 Instruction Set page 70 and 72