Documentation list: Difference between revisions
Jump to navigation
Jump to search
m (→ND-60.047 NORD PL USER'S GUIDE: Change from "pre" tag to "DocPre" templates + link to NORD PL article) |
(Change of photo, change of "pre" to "DocPre" templates for the rest of the article. "See also" changed to "Main article". Adding external links to WP. Fixing doc refs.) |
||
| Line 1: | Line 1: | ||
This is a compilation of documentation mentioned in the Norsk Data Documentation Catalogue. Links to online resources and references to where copies of the documentation recide should also be included. | This is a compilation of documentation mentioned in the Norsk Data Documentation Catalogue. Links to online resources and references to where copies of the documentation recide should also be included. | ||
Known documentation locations is in the [[Virtual library|library]] list. | Known documentation locations is in the [[Virtual library|library]] list. | ||
[[Image: | [[Image:CERN-PHOTO-7403016.jpg | 300px | thumb | [[NORD-10]] at CERN 1974]] | ||
== Manual numbering system == | == Manual numbering system == | ||
| Line 8: | Line 8: | ||
There is also revisions where one or more pages are replaced. Revisions is marked with a letters, starting with A. | There is also revisions where one or more pages are replaced. Revisions is marked with a letters, starting with A. | ||
{{DocPreStart}} | |||
Main subjects xx | Main subjects xx | ||
| Line 28: | Line 28: | ||
Reference cards | Reference cards | ||
99 : All reference cards | 99 : All reference cards | ||
{{DocPreEnd}} | |||
Reference : Norsk Data Documentation Catalogue (ND-40.004.06) page 4-5 | Reference : Norsk Data Documentation Catalogue (ND-40.004.06) page 4-5 | ||
| Line 37: | Line 37: | ||
==== ND-02.003 PIOC HARDWARE REFERENCE MANUAL ==== | ==== ND-02.003 PIOC HARDWARE REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
Short description : PIOC (Programmable Input Output Controller is an ND-100 I/O card with four full duplex serial lines. The hardware is based on an MC 68000 CPU and 128 kbyte ram. | Short description : PIOC (Programmable Input Output Controller is an ND-100 I/O card with four full duplex serial lines. The hardware is based on an MC 68000 CPU and 128 kbyte ram. | ||
90 pages ( 6 chapters and 4 appendixes). | 90 pages ( 6 chapters and 4 appendixes). | ||
{{DocPreEnd}} | |||
==== ND-02.004 PIOC HARDWARE REFERENCE MANUAL ND-865-867==== | ==== ND-02.004 PIOC HARDWARE REFERENCE MANUAL ND-865-867==== | ||
{{DocPreStart}} | |||
Same as ND-02.003 but with 256 kword local memory. | Same as ND-02.003 but with 256 kword local memory. | ||
60 pages. | 60 pages. | ||
{{DocPreEnd}} | |||
=== 05 : NORD-5, NORD-50, NORD-500 CPUs === | === 05 : NORD-5, NORD-50, NORD-500 CPUs === | ||
==== ND-05.003 NORD-50 REFERENCE MANUAL ==== | ==== ND-05.003 NORD-50 REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
Detailed description of the NORD-50 registers and instruction set. | Detailed description of the NORD-50 registers and instruction set. | ||
44 pages. | 44 pages. | ||
{{DocPreEnd}} | |||
==== ND-05.007 NORD-50 FUNCTIONAL DESCRIPTION ==== | ==== ND-05.007 NORD-50 FUNCTIONAL DESCRIPTION ==== | ||
{{DocPreStart}} | |||
Description of the main building blocks of the NORD-50 from a hardware point of view. | Description of the main building blocks of the NORD-50 from a hardware point of view. | ||
163 pages. | 163 pages. | ||
{{DocPreEnd}} | |||
==== ND-05.009 NORD-500 REFERENCE MANUAL ==== | ==== ND-05.009 NORD-500 REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
Description of the general design, register and instructions of the ND-500 and the ND-5000 computers. Written for the assembler programmers and system programmers. | Description of the general design, register and instructions of the ND-500 and the ND-5000 computers. Written for the assembler programmers and system programmers. | ||
300 pages. | 300 pages. | ||
{{DocPreEnd}} | |||
==== ND-05.010 INTRODUCTION TO ND-500 ==== | ==== ND-05.010 INTRODUCTION TO ND-500 ==== | ||
{{DocPreStart}} | |||
General description of ND-500 hardware and software. | General description of ND-500 hardware and software. | ||
Not available at the time of printing. | Not available at the time of printing. | ||
{{DocPreEnd}} | |||
==== ND-05.011 ND-500 HARDWARE DESCRIPTION ==== | ==== ND-05.011 ND-500 HARDWARE DESCRIPTION ==== | ||
{{DocPreStart}} | |||
Hardware description at a low level, suitable for service personnel and as course literature for ND-500 hardware courses. | Hardware description at a low level, suitable for service personnel and as course literature for ND-500 hardware courses. | ||
200 pages, 12 chapters and one appendix. | 200 pages, 12 chapters and one appendix. | ||
{{DocPreEnd}} | |||
==== ND-05.012 ND-500 MICROPROGRAMMING GUIDE ==== | ==== ND-05.012 ND-500 MICROPROGRAMMING GUIDE ==== | ||
{{DocPreStart}} | |||
Short introduction to microprogramming on ND-500. Suitable for people writing micro code routines. | Short introduction to microprogramming on ND-500. Suitable for people writing micro code routines. | ||
60 pages. | 60 pages. | ||
{{DocPreEnd}} | |||
==== ND-05.013 ND-500 ARRAY PROCESSING FUNCTIONS ==== | ==== ND-05.013 ND-500 ARRAY PROCESSING FUNCTIONS ==== | ||
{{DocPreStart}} | |||
Description of the array processing functions implemented in microcode on ND-500 and ND-570. Knowledge of Fortran is preferred. | Description of the array processing functions implemented in microcode on ND-500 and ND-570. Knowledge of Fortran is preferred. | ||
75 pages. | 75 pages. | ||
{{DocPreEnd}} | |||
==== ND-05.015 ND-500/2 HARDWARE DESCRIPTION ==== | ==== ND-05.015 ND-500/2 HARDWARE DESCRIPTION ==== | ||
{{DocPreStart}} | |||
Hardware description at a low level, suitable for service personnel. | Hardware description at a low level, suitable for service personnel. | ||
{{DocPreEnd}} | |||
==== ND-05.020 ND-5000 HARDWARE DESCRIPTION ==== | ==== ND-05.020 ND-5000 HARDWARE DESCRIPTION ==== | ||
{{DocPreStart}} | |||
Hardware description at a low level, suitable for service personnel. | Hardware description at a low level, suitable for service personnel. | ||
{{DocPreEnd}} | |||
=== 06 : NORD-1, NORD-10, NORD-10/S, NORD-100 CPUs === | === 06 : NORD-1, NORD-10, NORD-10/S, NORD-100 CPUs === | ||
==== ND-06.005 NORD-10/NORD-100 COMMUNICATION SYSTEM ==== | ==== ND-06.005 NORD-10/NORD-100 COMMUNICATION SYSTEM ==== | ||
{{DocPreStart}} | |||
Description of the communication hardware in the NORD-10 / NORD-50 system. Describes memory communication. Written for technical and maintenance personnel. | Description of the communication hardware in the NORD-10 / NORD-50 system. Describes memory communication. Written for technical and maintenance personnel. | ||
19 pages. | 19 pages. | ||
{{DocPreEnd}} | |||
==== ND-06.007 BIG MULTIPORT MEMORY SYSTEM ==== | ==== ND-06.007 BIG MULTIPORT MEMORY SYSTEM ==== | ||
{{DocPreStart}} | |||
Detailed description of the Big Multiport Memory System. Written for technical and maintenance personnel. | Detailed description of the Big Multiport Memory System. Written for technical and maintenance personnel. | ||
113 Pages. | 113 Pages. | ||
Availability : | Availability : Göran have original and scanned but no pdf yet. | ||
{{DocPreEnd}} | |||
==== ND-06.008 NORD-10/S REFERENCE MAUAL ==== | ==== ND-06.008 NORD-10/S REFERENCE MAUAL ==== | ||
{{DocPreStart}} | |||
Detailed description of NORD-10/S architecture from a hardware point of view. Written for technical and maintenance personnel. | Detailed description of NORD-10/S architecture from a hardware point of view. Written for technical and maintenance personnel. | ||
169 Pages. | 169 Pages. | ||
{{DocPreEnd}} | |||
==== ND-06.009 NORD-10/S FUNCTIONAL DESCRIPTION ==== | ==== ND-06.009 NORD-10/S FUNCTIONAL DESCRIPTION ==== | ||
{{DocPreStart}} | |||
Describes the main building blocks in the NORD-10/S. Written for technical and maintenance personnel. | Describes the main building blocks in the NORD-10/S. Written for technical and maintenance personnel. | ||
235 Pages. | 235 Pages. | ||
{{DocPreEnd}} | |||
==== ND-06.010 NORD-10/S MICROPROGRAM ==== | ==== ND-06.010 NORD-10/S MICROPROGRAM ==== | ||
{{DocPreStart}} | |||
Detailed description of NORD-10/S microinstructions and the microformat of the macroinstructions. Written for microprogram writers. | Detailed description of NORD-10/S microinstructions and the microformat of the macroinstructions. Written for microprogram writers. | ||
80 Pages. | 80 Pages. | ||
{{DocPreEnd}} | |||
==== ND-06.012 NORD-10/S INPUT/OUTPUT SYSTEM ==== | ==== ND-06.012 NORD-10/S INPUT/OUTPUT SYSTEM ==== | ||
{{DocPreStart}} | |||
Detailed description of NORD-10/S architecture from a hardware point of view. Written for technical and maintenance personnel. | Detailed description of NORD-10/S architecture from a hardware point of view. Written for technical and maintenance personnel. | ||
169 Pages. | 169 Pages. | ||
{{DocPreEnd}} | |||
==== ND-06.014 ND-100 REFERENCE MANUAL ==== | ==== ND-06.014 ND-100 REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
Description of the main building blocks of the the ND-100. Contains a detailed description of the instruction set. Written for technical and maintenance personnel. | Description of the main building blocks of the the ND-100. Contains a detailed description of the instruction set. Written for technical and maintenance personnel. | ||
250 Pages. | 250 Pages. | ||
| Line 152: | Line 157: | ||
01/83 ND-06.014.02 Revision A | 01/83 ND-06.014.02 Revision A | ||
Availability : | Availability : Göran have original and scanned but no pdf yet. (ND-06.014.02 Revision A) | ||
{{DocPreEnd}} | |||
==== ND-06.015 ND-100 FUNCTIONAL DESCRIPTION ==== | ==== ND-06.015 ND-100 FUNCTIONAL DESCRIPTION ==== | ||
{{Main|ND-06.015}} | |||
{{DocPreStart}} | |||
Description of the main building blocks of the ND-100 and their functions from a hardware point of view. Written for technical and maintenance personnel. | Description of the main building blocks of the ND-100 and their functions from a hardware point of view. Written for technical and maintenance personnel. | ||
340 Pages. | 340 Pages. | ||
{{DocPreEnd}} | |||
[http://bitsavers.org/pdf/norskData/ND-100-FD-ND-06.015.02_ND-100_Functional_Description_1985.pdf A copy is located on the Bitsavers website]. | [http://bitsavers.org/pdf/norskData/ND-100-FD-ND-06.015.02_ND-100_Functional_Description_1985.pdf A copy is located on the Bitsavers website]. | ||
==== ND-06.016 ND-100 INPUT/OUTPUT SYSTEM ==== | ==== ND-06.016 ND-100 INPUT/OUTPUT SYSTEM ==== | ||
{{DocPreStart}} | |||
Description of the input / output system architecture of the the ND-100 from a hardware point of view. It gives fundamental design concepts of the I/O system and is good to describe how to connect and program I/O interfaces. Written for technical and maintenance personnel. Recommends the ND-100 Reference Manual and MAC Assembler User's Guide. | Description of the input / output system architecture of the the ND-100 from a hardware point of view. It gives fundamental design concepts of the I/O system and is good to describe how to connect and program I/O interfaces. Written for technical and maintenance personnel. Recommends the ND-100 Reference Manual and MAC Assembler User's Guide. | ||
222 Pages. | 222 Pages. | ||
Availability : | Availability : Göran have original and scanned but no pdf yet. (ND-06.016.1 EN) | ||
{{DocPreEnd}} | |||
==== ND-06.017 ND-100 BACKPLANE ==== | ==== ND-06.017 ND-100 BACKPLANE ==== | ||
{{DocPreStart}} | |||
Brief description of the backplane used in bus organized systems. Built on a triple Euroboard standard, the bus backplane is mainly oriented towards connecting I/O but also support processing and memory units too. | Brief description of the backplane used in bus organized systems. Built on a triple Euroboard standard, the bus backplane is mainly oriented towards connecting I/O but also support processing and memory units too. | ||
18 Pages. | 18 Pages. | ||
{{DocPreEnd}} | |||
==== ND-06.018 ND-100 MICROPROGRAMMING ==== | ==== ND-06.018 ND-100 MICROPROGRAMMING ==== | ||
{{DocPreStart}} | |||
Description of how to microprogram the ND-100 and use the writable control store. Written for technical personnel writing their own microprogram. It also gives a detailed understanding of the ND-100 CPU. | Description of how to microprogram the ND-100 and use the writable control store. Written for technical personnel writing their own microprogram. It also gives a detailed understanding of the ND-100 CPU. | ||
73 Pages. | 73 Pages. | ||
{{DocPreEnd}} | |||
==== ND-06.020 INTRODUCTION TO ND-100 ==== | ==== ND-06.020 INTRODUCTION TO ND-100 ==== | ||
{{DocPreStart}} | |||
An overview of the hardware and software. Gives a generad description of the ND-100 system. Written for people with basic or no computer knowledge. | An overview of the hardware and software. Gives a generad description of the ND-100 system. Written for people with basic or no computer knowledge. | ||
Not available at time of printing. | Not available at time of printing. | ||
{{DocPreEnd}} | |||
=== 10 : Multiport 4 and 5 system === | === 10 : Multiport 4 and 5 system === | ||
==== ND-10.003 TECHNICAL INTRODUCTION TO MULTIPORT 4 ==== | ==== ND-10.003 TECHNICAL INTRODUCTION TO MULTIPORT 4 ==== | ||
{{DocPreStart}} | |||
Description of the multiport system used in ND-100 and ND-100/ND-500 multiprocessor configurations. It gives some examples of configurations with the new MPM-4 modules. Familiarity with the ND-100 architecture is expected of the reader. | Description of the multiport system used in ND-100 and ND-100/ND-500 multiprocessor configurations. It gives some examples of configurations with the new MPM-4 modules. Familiarity with the ND-100 architecture is expected of the reader. | ||
37 Pages. | 37 Pages. | ||
{{DocPreEnd}} | |||
==== ND-10.004 MULTIPORT MEMORY 5 TECHNICAL DESCRIPTION ==== | ==== ND-10.004 MULTIPORT MEMORY 5 TECHNICAL DESCRIPTION ==== | ||
{{DocPreStart}} | |||
Hardware description of the following MPM-5 products. | Hardware description of the following MPM-5 products. | ||
ND-382 RAM 1Mb Memory Module | ND-382 RAM 1Mb Memory Module | ||
| Line 207: | Line 212: | ||
It also includes a programmers guide, instructions for start-up and initialization and error messages. Written for service personnel and system and hardware designers. | It also includes a programmers guide, instructions for start-up and initialization and error messages. Written for service personnel and system and hardware designers. | ||
90 Pages. | 90 Pages. | ||
{{DocPreEnd}} | |||
==== ND-10.006 MULTIPORT MEMORY CHANNEL SPECIFICATIONS ==== | ==== ND-10.006 MULTIPORT MEMORY CHANNEL SPECIFICATIONS ==== | ||
{{DocPreStart}} | |||
An introduction to the Multiport Memory concept in general. Multiport Memory is a shared memory system which expands memory capacity and allows for multiprocessor operation. The manual contains a description of all three models Norsk Data supports. It contains interface descriptions for all three models. Written for service personnel and people who works with Multiport Memory. | An introduction to the Multiport Memory concept in general. Multiport Memory is a shared memory system which expands memory capacity and allows for multiprocessor operation. The manual contains a description of all three models Norsk Data supports. It contains interface descriptions for all three models. Written for service personnel and people who works with Multiport Memory. | ||
40 Pages. | 40 Pages. | ||
{{DocPreEnd}} | |||
=== 11 : Data storage equipment === | === 11 : Data storage equipment === | ||
==== ND-11.009 HAWK - DISK SYSTEM ==== | ==== ND-11.009 HAWK - DISK SYSTEM ==== | ||
{{DocPreStart}} | |||
Reference and users guide for the HAWK-disk system. Describes major components and hardware of the system. | Reference and users guide for the HAWK-disk system. Describes major components and hardware of the system. | ||
133 Pages. | 133 Pages. | ||
{{DocPreEnd}} | |||
==== ND-11.010 NORD-10/HAWK DISK CONTROLLER ==== | ==== ND-11.010 NORD-10/HAWK DISK CONTROLLER ==== | ||
{{DocPreStart}} | |||
Reference manual and users guide for the NORD-10/HAWK Disk Controller. It describes programming specifications, interface signals and disk addressing. | Reference manual and users guide for the NORD-10/HAWK Disk Controller. It describes programming specifications, interface signals and disk addressing. | ||
76 Pages. | 76 Pages. | ||
{{DocPreEnd}} | |||
==== ND-11.012 FLOPPY DISK SYSTEM ==== | ==== ND-11.012 FLOPPY DISK SYSTEM ==== | ||
{{DocPreStart}} | |||
Reference manual and users guide for the Floppy Disk System. It describes the system, the interface and the formatter. | Reference manual and users guide for the Floppy Disk System. It describes the system, the interface and the formatter. | ||
183 Pages. | 183 Pages. | ||
{{DocPreEnd}} | |||
==== ND-11.013 NORD-10/S ERROR CORRECTION CONTROL (ECC) DISK CONTROLLER ==== | ==== ND-11.013 NORD-10/S ERROR CORRECTION CONTROL (ECC) DISK CONTROLLER ==== | ||
{{DocPreStart}} | |||
Description of the ECC disk controller. It contains information, a general description and detailed interface and programming instructions. Troubleshooting advice and logic diagrams are included. | Description of the ECC disk controller. It contains information, a general description and detailed interface and programming instructions. Troubleshooting advice and logic diagrams are included. | ||
100 Pages. | 100 Pages. | ||
{{DocPreEnd}} | |||
==== ND-11.014 STC MAGTAPE SYSTEM ==== | ==== ND-11.014 STC MAGTAPE SYSTEM ==== | ||
{{DocPreStart}} | |||
Reference manual for the STC magtape subsystem. It describes how to connect STC magnetic tapes to a ND-100 computer and the look of the 3200 STC magtape controller. Programming specifications for driver routine and a user guide to test programs are also included. Written for field service engineers and operators. | Reference manual for the STC magtape subsystem. It describes how to connect STC magnetic tapes to a ND-100 computer and the look of the 3200 STC magtape controller. Programming specifications for driver routine and a user guide to test programs are also included. Written for field service engineers and operators. | ||
96 Pages. | 96 Pages. | ||
{{DocPreEnd}} | |||
==== ND-11.015 FLOPPY DISK CONTROLLER - 3027 ==== | ==== ND-11.015 FLOPPY DISK CONTROLLER - 3027 ==== | ||
{{DocPreStart}} | |||
General description of the Floppy Disk Controller-3027. It contains general information of hardware and self test feature. Read and write operations and associated commands are covered. | General description of the Floppy Disk Controller-3027. It contains general information of hardware and self test feature. Read and write operations and associated commands are covered. | ||
50 Pages. | 50 Pages. | ||
{{DocPreEnd}} | |||
==== ND-11.016 8 INCH WINCHESTER DISK CONTROLLER ST506 & FINCH ==== | ==== ND-11.016 8 INCH WINCHESTER DISK CONTROLLER ST506 & FINCH ==== | ||
{{DocPreStart}} | |||
The eight inch Winchester Disk Controller consists of one 3038 card controlling one or two Winchester disk drives. The 5 1/4 inch, ST506, Winchester Disk Controller consists of the 3014 card. | The eight inch Winchester Disk Controller consists of one 3038 card controlling one or two Winchester disk drives. The 5 1/4 inch, ST506, Winchester Disk Controller consists of the 3014 card. | ||
The manual gives an introduction of the disk drive, bad track handling and the controller. It also contains programming specifications, test procedure, block diagrams, logic diagrams, component layout, cable signals and a short description o the Fairchild circuit 9401. | The manual gives an introduction of the disk drive, bad track handling and the controller. It also contains programming specifications, test procedure, block diagrams, logic diagrams, component layout, cable signals and a short description o the Fairchild circuit 9401. | ||
50 Pages. | 50 Pages. | ||
{{DocPreEnd}} | |||
Reference : [[Wikipedia:ST506|ST506]] | Reference : [[Wikipedia:ST506|ST506]] | ||
==== ND-11.019 DUAL CHANNEL DISK SWITCH ==== | ==== ND-11.019 DUAL CHANNEL DISK SWITCH ==== | ||
{{DocPreStart}} | |||
The dual channel disk switch sits between a disk and two controllers. It selects which controller that is allowed to access the disk. | The dual channel disk switch sits between a disk and two controllers. It selects which controller that is allowed to access the disk. | ||
This manual describes which disks that can be used and relevant hardware and software information. | This manual describes which disks that can be used and relevant hardware and software information. | ||
25 Pages. | 25 Pages. | ||
{{DocPreEnd}} | |||
==== ND-11.021 FLOPPY AND STREAMER CONTROLLER 3106/3112 ==== | ==== ND-11.021 FLOPPY AND STREAMER CONTROLLER 3106/3112 ==== | ||
{{DocPreStart}} | |||
Detailed description of the Floppy and Streamer Controller. It contains information for both the 8" F & S Controller card 3106 and the 8" and 5 1/4" F & S Controller card 3112. | Detailed description of the Floppy and Streamer Controller. It contains information for both the 8" F & S Controller card 3106 and the 8" and 5 1/4" F & S Controller card 3112. | ||
130 Pages. | 130 Pages. | ||
{{DocPreEnd}} | |||
=== 12 : I/O Interfaces === | === 12 : I/O Interfaces === | ||
==== ND-12.004 CAMAC CDMA NORD-10 ==== | ==== ND-12.004 CAMAC CDMA NORD-10 ==== | ||
{{DocPreStart}} | |||
A detailed description of the operation, programming instructions and diagrams. | A detailed description of the operation, programming instructions and diagrams. | ||
20 Pages. | 20 Pages. | ||
{{DocPreEnd}} | |||
==== ND-12.006 CAMAC CC-NORD-10 HARDWARE ==== | ==== ND-12.006 CAMAC CC-NORD-10 HARDWARE ==== | ||
{{DocPreStart}} | |||
A detailed description of programming instructions, logic diagrams, component lists and signal definitions. | A detailed description of programming instructions, logic diagrams, component lists and signal definitions. | ||
50 Pages. | 50 Pages. | ||
{{DocPreEnd}} | |||
==== ND-12.007 CAMAC CC-NORD-10 INTERFACE ==== | ==== ND-12.007 CAMAC CC-NORD-10 INTERFACE ==== | ||
{{DocPreStart}} | |||
General informaton on the operation of the CC-NORD-10 crate controller which interfaces CAMAC crates directly to the I/O bus on the NORD-10. It contains physical and electrical specifications, interrupt, LAM handling and Link Bus characteristics. Information about data formats, programming and addressing on CC-NORD-10. | General informaton on the operation of the CC-NORD-10 crate controller which interfaces CAMAC crates directly to the I/O bus on the NORD-10. It contains physical and electrical specifications, interrupt, LAM handling and Link Bus characteristics. Information about data formats, programming and addressing on CC-NORD-10. | ||
17 Pages. | 17 Pages. | ||
{{DocPreEnd}} | |||
==== ND-12.012 INTERFACE TO PERTEC MAGNETIC TAPE ==== | ==== ND-12.012 INTERFACE TO PERTEC MAGNETIC TAPE ==== | ||
{{DocPreStart}} | |||
A description of the signals between 1123 and 1124. Also includes programming specifications, description of the formatter, logic diagrams and hardware information. | A description of the signals between 1123 and 1124. Also includes programming specifications, description of the formatter, logic diagrams and hardware information. | ||
60 Pages. | 60 Pages. | ||
{{DocPreEnd}} | |||
==== ND-12.013 NORDCOM COLOUR TERMINAL ==== | ==== ND-12.013 NORDCOM COLOUR TERMINAL ==== | ||
{{DocPreStart}} | |||
Information about the ND676 NORDCOM colour terminal. Complete with product description, interface specifications, block and logic diagrams and test procedures. Written as a maintenance manual. | Information about the ND676 NORDCOM colour terminal. Complete with product description, interface specifications, block and logic diagrams and test procedures. Written as a maintenance manual. | ||
160 Pages. | 160 Pages. | ||
{{DocPreEnd}} | |||
==== ND-12.015 1158 DR-11-C INTERFACE ==== | ==== ND-12.015 1158 DR-11-C INTERFACE ==== | ||
{{DocPreStart}} | |||
Introduction to the 1158 DR-11-C interface.It contains an introduction, hardware descriptions, programming instructions. Test procedures are given with both block diagrams and logic diagrams. | Introduction to the 1158 DR-11-C interface.It contains an introduction, hardware descriptions, programming instructions. Test procedures are given with both block diagrams and logic diagrams. | ||
20 Pages. | 20 Pages. | ||
{{DocPreEnd}} | |||
==== ND-12.016 DATA COMMUNITATION ==== | ==== ND-12.016 DATA COMMUNITATION ==== | ||
{{DocPreStart}} | |||
General information about data communication. It describes networks, multiplexing and modems. It also describes communication procedures and data terminal equipment. Written as an introduction to data communication. | General information about data communication. It describes networks, multiplexing and modems. It also describes communication procedures and data terminal equipment. Written as an introduction to data communication. | ||
150 Pages. | 150 Pages. | ||
{{DocPreEnd}} | |||
==== ND-12.018 HDLC INTERFACE ==== | ==== ND-12.018 HDLC INTERFACE ==== | ||
{{DocPreStart}} | |||
Introduction to the High Level Data Link Control interface. It contains standards, procedures, programming instructions, logic diagrams and a detailed description of the Multiprotocol Communication Controller. | Introduction to the High Level Data Link Control interface. It contains standards, procedures, programming instructions, logic diagrams and a detailed description of the Multiprotocol Communication Controller. | ||
100 Pages. | 100 Pages. | ||
{{DocPreEnd}} | |||
==== ND-12.020 UNIVERSAL DMA INTERFACE ND852 ==== | ==== ND-12.020 UNIVERSAL DMA INTERFACE ND852 ==== | ||
{{DocPreStart}} | |||
This is a user's guide to interfacing and programming the ND852 Universal DMA Interface. It contains a hardware description, describes mechanical and electrical specifications, schematics, plug lists and programming instructions. | This is a user's guide to interfacing and programming the ND852 Universal DMA Interface. It contains a hardware description, describes mechanical and electrical specifications, schematics, plug lists and programming instructions. | ||
40 Pages. | 40 Pages. | ||
{{DocPreEnd}} | |||
==== ND-12.023 GENERAL PURPOSE INTERFACE BUS (GPIB) USER'S GUIDE ==== | ==== ND-12.023 GENERAL PURPOSE INTERFACE BUS (GPIB) USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
GPIB is used on the ND systems to connect to instruments and equipment using the GPIB standard. The end user software consists of a GPIB MONITOR and a GPIB LIBRARY callable from FORTRAN. This manual is intended for users and programmers of GPIB system. | GPIB is used on the ND systems to connect to instruments and equipment using the GPIB standard. The end user software consists of a GPIB MONITOR and a GPIB LIBRARY callable from FORTRAN. This manual is intended for users and programmers of GPIB system. | ||
110 Pages. | 110 Pages. | ||
{{DocPreEnd}} | |||
==== ND-12.024 FACIT 4420/ND USERS GUIDE ==== | ==== ND-12.024 FACIT 4420/ND USERS GUIDE ==== | ||
{{DocPreStart}} | |||
This is a description of the FACIT 4420/ND Video Terminal. Part 1 is written as a guide for terminal users. Part 2 is written for programmers as a complement for the FACIT 4420 Technical description published by FACIT Data Products. | This is a description of the FACIT 4420/ND Video Terminal. Part 1 is written as a guide for terminal users. Part 2 is written for programmers as a complement for the FACIT 4420 Technical description published by FACIT Data Products. | ||
65 Pages. | 65 Pages. | ||
{{DocPreEnd}} | |||
=== 13 : Miscelaneous hardware === | === 13 : Miscelaneous hardware === | ||
==== ND-13.003 CIRCUIT DIAGRAM SYMBOLS ==== | ==== ND-13.003 CIRCUIT DIAGRAM SYMBOLS ==== | ||
{{DocPreStart}} | |||
This is a reference manual covering the symbols used in Norsk Data circit diagrams. It also describes rules for logical expressions and definitions of logic signals. | This is a reference manual covering the symbols used in Norsk Data circit diagrams. It also describes rules for logical expressions and definitions of logic signals. | ||
62 Pages. | 62 Pages. | ||
{{DocPreEnd}} | |||
==== ND-13.012 NORD-10 POWER UNIT ==== | ==== ND-13.012 NORD-10 POWER UNIT ==== | ||
{{DocPreStart}} | |||
This is the reference and maintenance manual for the NORD Power Unit 10. Written for service personnel maintaining CPU:s that use this power supply. It contains maintenance instructions for battery replacement and adjustment procedures. | This is the reference and maintenance manual for the NORD Power Unit 10. Written for service personnel maintaining CPU:s that use this power supply. It contains maintenance instructions for battery replacement and adjustment procedures. | ||
26 Pages. | 26 Pages. | ||
{{DocPreEnd}} | |||
==== ND-13.014 SITE PREPARATION AND INSTALLATION MANUAL ==== | ==== ND-13.014 SITE PREPARATION AND INSTALLATION MANUAL ==== | ||
{{DocPreStart}} | |||
This is a reference manual covering how to set up a computer site for Norsk Data equipment. It covers NORD-10/S NORD-50, ND-100 and ND-500 computers. | This is a reference manual covering how to set up a computer site for Norsk Data equipment. It covers NORD-10/S NORD-50, ND-100 and ND-500 computers. | ||
46 Pages. | 46 Pages. | ||
{{DocPreEnd}} | |||
==== ND-13.015 PLANLEGGING OG INSTALLASJONSMANUAL ==== | ==== ND-13.015 PLANLEGGING OG INSTALLASJONSMANUAL ==== | ||
{{DocPreStart}} | |||
This is a Norwegian version of the ND-13.014 manual. | This is a Norwegian version of the ND-13.014 manual. | ||
46 Pages. | 46 Pages. | ||
{{DocPreEnd}} | |||
== Mixed hardware/software == | == Mixed hardware/software == | ||
| Line 374: | Line 379: | ||
==== ND-30.001 NORD-10/NORD-50 OPERATOR'S GUIDE ==== | ==== ND-30.001 NORD-10/NORD-50 OPERATOR'S GUIDE ==== | ||
{{DocPreStart}} | |||
This is an introduction to operation and daily maintaining of NORD-10/S and NORD/50 systems. Written for daily operation of the system. | This is an introduction to operation and daily maintaining of NORD-10/S and NORD/50 systems. Written for daily operation of the system. | ||
134 Pages. | 134 Pages. | ||
{{DocPreEnd}} | |||
==== ND-30.003 SINTRAN III System Supervisor ==== | ==== ND-30.003 SINTRAN III System Supervisor ==== | ||
{{DocPreStart}} | |||
This manual is a guide for system supervisors administering data centers. Written for daily operation of the system. It contains information on how to start various hardware, doing warm start, managing disk space, making backups, managing users, ... | This manual is a guide for system supervisors administering data centers. Written for daily operation of the system. It contains information on how to start various hardware, doing warm start, managing disk space, making backups, managing users, ... | ||
It also contains a chapter on loading and using test programs. | It also contains a chapter on loading and using test programs. | ||
| Line 395: | Line 400: | ||
revision 07 420 pages | revision 07 420 pages | ||
Availability : | Availability : Göran have original, not scanned yet. (ND-30.003.06A, ND-30.003.07 EN) | ||
{{DocPreEnd}} | |||
==== ND-30.004 NORD-10/S HARDWARE MAINTENANCE MANUAL ==== | ==== ND-30.004 NORD-10/S HARDWARE MAINTENANCE MANUAL ==== | ||
{{DocPreStart}} | |||
Written for field service engineers, this manual covers topics as technical description and physical layout of the CPU, memory and I/O system, hardware maintenance, module substitution, error symptoms, troubleshooting. Hardware covered is the CPU, memory, power system, DMA controllers and character devices. | Written for field service engineers, this manual covers topics as technical description and physical layout of the CPU, memory and I/O system, hardware maintenance, module substitution, error symptoms, troubleshooting. Hardware covered is the CPU, memory, power system, DMA controllers and character devices. | ||
200 Pages. | 200 Pages. | ||
{{DocPreEnd}} | |||
==== ND-30.005 TEST PROGRAM DESCRIPTIONS ==== | ==== ND-30.005 TEST PROGRAM DESCRIPTIONS ==== | ||
{{DocPreStart}} | |||
This manual describes the test programs used on ND-100, NORD-10/S, NORD-10 and NORD-12 computers. The manual consists of three parts. The first part contains a detailed description of the FLOPPY MONITOR and the TEST PROGRAM MONITOR. 15 chapters describes the 15 tests contained on the test floppy 1, ND-10324E, the most commonly used tests. | This manual describes the test programs used on ND-100, NORD-10/S, NORD-10 and NORD-12 computers. The manual consists of three parts. The first part contains a detailed description of the FLOPPY MONITOR and the TEST PROGRAM MONITOR. 15 chapters describes the 15 tests contained on the test floppy 1, ND-10324E, the most commonly used tests. | ||
The next part covers the 27 tests contained on the test floppy 2, ND-10325B. The last part covers the tests on the test floppy 3, ND-10326B. | The next part covers the 27 tests contained on the test floppy 2, ND-10325B. The last part covers the tests on the test floppy 3, ND-10326B. | ||
The manual is written for maintenance personnel working on ND-100 or NORD-10 systems. | The manual is written for maintenance personnel working on ND-100 or NORD-10 systems. | ||
250 Pages. | 250 Pages. | ||
{{DocPreEnd}} | |||
==== ND-30.010 NORD-50 HARDWARE MAINTENANCE MANUAL ==== | ==== ND-30.010 NORD-50 HARDWARE MAINTENANCE MANUAL ==== | ||
{{DocPreStart}} | |||
Written for field service engineers working on NORD-5 systems. This manual covers topics as the racks and operators panel, the NORD-50 monitor, error messages, test program information, memory, expansion memory and the power system. | Written for field service engineers working on NORD-5 systems. This manual covers topics as the racks and operators panel, the NORD-50 monitor, error messages, test program information, memory, expansion memory and the power system. | ||
eneral knowledge of NORD-10/S hardware and SINTRAN III are required. | eneral knowledge of NORD-10/S hardware and SINTRAN III are required. | ||
200 Pages. | 200 Pages. | ||
{{DocPreEnd}} | |||
==== ND-30.013 TEST MICRO PROGRAM DESCRIPTION FOR ND-500 ==== | ==== ND-30.013 TEST MICRO PROGRAM DESCRIPTION FOR ND-500 ==== | ||
{{DocPreStart}} | |||
Written for field service engineers and personnel testing ND-500 CPUs. It describes the test programs used for testing the CPU and the procedure for their implementation. | Written for field service engineers and personnel testing ND-500 CPUs. It describes the test programs used for testing the CPU and the procedure for their implementation. | ||
116 Pages. | 116 Pages. | ||
{{DocPreEnd}} | |||
==== ND-30.014 ND-500 HARDWARE MAINTENANCE MANUAL ==== | ==== ND-30.014 ND-500 HARDWARE MAINTENANCE MANUAL ==== | ||
{{DocPreStart}} | |||
Written for field service engineers. | Written for field service engineers. | ||
Not available at printing time. | Not available at printing time. | ||
{{DocPreEnd}} | |||
==== ND-30.018 TEST PROGRAM DESCRIPTION - ND-500 ==== | ==== ND-30.018 TEST PROGRAM DESCRIPTION - ND-500 ==== | ||
{{DocPreStart}} | |||
This manual describes the ND-500 DESMODUR verification system. It is written in two parts. Part one describes the various tests to verify ND-500 microcode and hardware. Part two gives a description on how to extend with new test programs. | This manual describes the ND-500 DESMODUR verification system. It is written in two parts. Part one describes the various tests to verify ND-500 microcode and hardware. Part two gives a description on how to extend with new test programs. | ||
108 Pages. | 108 Pages. | ||
{{DocPreEnd}} | |||
==== ND-30.020 ACCESS DBA HÅDBOK ==== | ==== ND-30.020 ACCESS DBA HÅDBOK ==== | ||
{{DocPreStart}} | |||
This is a Norwegian version of the ACCESS DBA Manual, ND-30.022 | This is a Norwegian version of the ACCESS DBA Manual, ND-30.022 | ||
55 Pages. | 55 Pages. | ||
{{DocPreEnd}} | |||
==== ND-30.022 ACCESS DBA MANUAL ==== | ==== ND-30.022 ACCESS DBA MANUAL ==== | ||
{{DocPreStart}} | |||
This is the reference manual for Data Base Administrator for an ACCESS system. | This is the reference manual for Data Base Administrator for an ACCESS system. | ||
90 Pages. | 90 Pages. | ||
{{DocPreEnd}} | |||
==== ND-30.024 SATELLITE INSTALLATION AND OPERATION GUIDE ==== | ==== ND-30.024 SATELLITE INSTALLATION AND OPERATION GUIDE ==== | ||
[[Image:ND-100_Satellite.jpg | thumb | ND 100 Satellite]] | [[Image:ND-100_Satellite.jpg | thumb | ND 100 Satellite]] | ||
{{DocPreStart}} | |||
This manual replaces an earlier version, ND-30.024 ND SATELLITE SYSTEM. It guides in the steps from unpacking to using the machine. It describes installation, connecting terminals and printers, loading the operation system, maintenancy and backup. It is written for the local supervisor of the system. | This manual replaces an earlier version, ND-30.024 ND SATELLITE SYSTEM. It guides in the steps from unpacking to using the machine. It describes installation, connecting terminals and printers, loading the operation system, maintenancy and backup. It is written for the local supervisor of the system. | ||
70 Pages. | 70 Pages. | ||
{{DocPreEnd}} | |||
==== ND-30.025 COSMOS OPERATORS GUIDE ==== | ==== ND-30.025 COSMOS OPERATORS GUIDE ==== | ||
{{DocPreStart}} | |||
This manual replaces an earlier version, ND-30.025 COSMOS System Supervisor. It contains a guide to install and operate the network facilities of COSMOS Basic Module (ND 10374) and IS XMSG (ND 10373). Written for system and network supervisors. | This manual replaces an earlier version, ND-30.025 COSMOS System Supervisor. It contains a guide to install and operate the network facilities of COSMOS Basic Module (ND 10374) and IS XMSG (ND 10373). Written for system and network supervisors. | ||
100 Pages. | 100 Pages. | ||
{{DocPreEnd}} | |||
==== ND-30.026 NORDRIFT - HÅNDBOK FOR DRIFTSOPERATØRER ==== | ==== ND-30.026 NORDRIFT - HÅNDBOK FOR DRIFTSOPERATØRER ==== | ||
{{DocPreStart}} | |||
This is the Norwegian version of the Operator's Guide for TPS-II. It documents the ND 10342 ND Transaction Processing System - TPS-II. Written for operators of TPS-II operators. | This is the Norwegian version of the Operator's Guide for TPS-II. It documents the ND 10342 ND Transaction Processing System - TPS-II. Written for operators of TPS-II operators. | ||
110 Pages. | 110 Pages. | ||
{{DocPreEnd}} | |||
==== ND-30.029 TEST MICROPROGRAM DESCRIPTIONS FOR ND-500/2 ==== | ==== ND-30.029 TEST MICROPROGRAM DESCRIPTIONS FOR ND-500/2 ==== | ||
{{DocPreStart}} | |||
This manual gives a short introduction to ND-500/2 microprograming and usage of available test microprograms. It includes instructions on how to start the ND-50/2 test microprograms. Written for production and service personnel or people wanting to write their own microrogram testing routines. | This manual gives a short introduction to ND-500/2 microprograming and usage of available test microprograms. It includes instructions on how to start the ND-50/2 test microprograms. Written for production and service personnel or people wanting to write their own microrogram testing routines. | ||
110 Pages. | 110 Pages. | ||
{{DocPreEnd}} | |||
==== ND-30.030 ND TPS-II OPERATOR GUIDE ==== | ==== ND-30.030 ND TPS-II OPERATOR GUIDE ==== | ||
{{DocPreStart}} | |||
This manual describes the ND 10342 ND Transaction Processing System - TPS-II. It contains all information needed to run a system based on TPS-II. Written for operators of TPS-II systems. | This manual describes the ND 10342 ND Transaction Processing System - TPS-II. It contains all information needed to run a system based on TPS-II. Written for operators of TPS-II systems. | ||
105 Pages. | 105 Pages. | ||
{{DocPreEnd}} | |||
==== ND-30.031 ND-100 COMPACT OPERATOR GUIDE ==== | ==== ND-30.031 ND-100 COMPACT OPERATOR GUIDE ==== | ||
{{DocPreStart}} | |||
This is a practical guide for operators of the ND-100 Compact computer. It contains a description of the operator's panel, how to start the computer, how to use the floppy and tape streamer, making backups and how to handle some simple errors. | This is a practical guide for operators of the ND-100 Compact computer. It contains a description of the operator's panel, how to start the computer, how to use the floppy and tape streamer, making backups and how to handle some simple errors. | ||
54 Pages. | 54 Pages. | ||
{{DocPreEnd}} | |||
==== ND-30.033 COSMOS X.21 OPTION OPERATOR GUIDE ==== | ==== ND-30.033 COSMOS X.21 OPTION OPERATOR GUIDE ==== | ||
{{DocPreStart}} | |||
This manual describes the ND-10403 COSMOS X.21 Option. Written for system operators. | This manual describes the ND-10403 COSMOS X.21 Option. Written for system operators. | ||
60 Pages. | 60 Pages. | ||
{{DocPreEnd}} | |||
==== ND-30.034 COSMOS X.25 OPTION OPERATOR GUIDE ==== | ==== ND-30.034 COSMOS X.25 OPTION OPERATOR GUIDE ==== | ||
{{DocPreStart}} | |||
This manual describes the ND-10573 COSMOS X.25 Option. It contains two parts, the first gives the procedures for starting up and operating the COSMOS X.25 network system. The second part contains reference information about the functions from the first part and aditional advanced functions. Written for system operators. | This manual describes the ND-10573 COSMOS X.25 Option. It contains two parts, the first gives the procedures for starting up and operating the COSMOS X.25 network system. The second part contains reference information about the functions from the first part and aditional advanced functions. Written for system operators. | ||
110 Pages. | 110 Pages. | ||
{{DocPreEnd}} | |||
==== ND-30.038 SNA 3270 TERMINAL EMULATOR OPERATOR GUIDE ==== | ==== ND-30.038 SNA 3270 TERMINAL EMULATOR OPERATOR GUIDE ==== | ||
{{DocPreStart}} | |||
This manual describes the ND-10741 SNA Gateway Single Line and ND-10742 SNA Terminal Emulator. It contains an introduction to the ND SNA Emulator, how it is implemented and started, the operation of the system, differences between the ND 246 NOTIS keyboard and the IBM 3270 keyboard. Written for operators and other personnel using the ND 246 NOTIS terminal. | This manual describes the ND-10741 SNA Gateway Single Line and ND-10742 SNA Terminal Emulator. It contains an introduction to the ND SNA Emulator, how it is implemented and started, the operation of the system, differences between the ND 246 NOTIS keyboard and the IBM 3270 keyboard. Written for operators and other personnel using the ND 246 NOTIS terminal. | ||
50 Pages. | 50 Pages. | ||
{{DocPreEnd}} | |||
=== 40 : Miscellaneous === | === 40 : Miscellaneous === | ||
==== ND-40.004 Documentation Catalogue ==== | ==== ND-40.004 Documentation Catalogue ==== | ||
{{DocPreStart}} | |||
This is a list of how ND documentation is connected, what different manuals there is and a short description of the content. In the end there is a price list and instructions on how to order manuals. | This is a list of how ND documentation is connected, what different manuals there is and a short description of the content. In the end there is a price list and instructions on how to order manuals. | ||
90 Pages. | 90 Pages. | ||
{{DocPreEnd}} | |||
==== ND-40.005 NORSK DATA GLOSSARY ==== | ==== ND-40.005 NORSK DATA GLOSSARY ==== | ||
{{DocPreStart}} | |||
This is a glossary over terms used in ND manuals. ND abbreviations are also listed. Some common computer terms are also explained. | This is a glossary over terms used in ND manuals. ND abbreviations are also listed. Some common computer terms are also explained. | ||
Not available at printing time. | Not available at printing time. | ||
{{DocPreEnd}} | |||
=== 50 : Hardware / software system description === | === 50 : Hardware / software system description === | ||
| Line 527: | Line 533: | ||
==== ND-60.031 QED USER MANUAL ==== | ==== ND-60.031 QED USER MANUAL ==== | ||
{{DocPreStart}} | |||
This is a users guide and reference manual for the QED text editor. QED is designed for maintain source code but could be used for general text editing. | This is a users guide and reference manual for the [[QED]] text editor. QED is designed for maintain source code but could be used for general text editing. | ||
40 Pages. | 40 Pages. | ||
{{DocPreEnd}} | |||
==== ND-60.037 SCIENTIFIC SUBROUTINE PACKAGE ==== | ==== ND-60.037 SCIENTIFIC SUBROUTINE PACKAGE ==== | ||
{{DocPreStart}} | |||
The Scientific Subroutine Package is a collection of mathematical routines for FORTRAN. In includes functions for statistical and mathematical calculations, matrix manipulation, integration, root finding and more. This manual describes the various subroutines and is written for programmers. | The Scientific Subroutine Package is a collection of mathematical routines for FORTRAN. In includes functions for statistical and mathematical calculations, matrix manipulation, integration, root finding and more. This manual describes the various subroutines and is written for programmers. | ||
288 Pages. | 288 Pages. | ||
{{DocPreEnd}} | |||
==== ND-60.041 NORD IDT GERTS-115 OPERATOR'S GUIDE ==== | ==== ND-60.041 NORD IDT GERTS-115 OPERATOR'S GUIDE ==== | ||
{{DocPreStart}} | |||
This manual describes the functions of the ND IDT GERTS-115. It is an operator's guide and contains information about starting and running the system. It includes load instructions for various systems including SINTRAN III. | This manual describes the functions of the ND IDT GERTS-115. It is an operator's guide and contains information about starting and running the system. It includes load instructions for various systems including SINTRAN III. | ||
30 Pages. | 30 Pages. | ||
{{DocPreEnd}} | |||
==== ND-60.046 TRACE ROUTINE ==== | ==== ND-60.046 TRACE ROUTINE ==== | ||
{{DocPreStart}} | |||
TR is a program that makes it possible to run other programs one instruction at a time. This manual describes how to trace programs and simulate IOT commands. Written for programmers and system operators. | TR is a program that makes it possible to run other programs one instruction at a time. This manual describes how to trace programs and simulate IOT commands. Written for programmers and system operators. | ||
16 Pages. | 16 Pages. | ||
| Line 553: | Line 559: | ||
84 ND-60.046.02 Second printing | 84 ND-60.046.02 Second printing | ||
Availability : | Availability : Göran have original and scanned but no pdf yet. (ND-60.046.02) | ||
{{DocPreEnd}} | |||
==== ND-60.047 NORD PL USER'S GUIDE ==== | ==== ND-60.047 NORD PL USER'S GUIDE ==== | ||
| Line 563: | Line 569: | ||
==== ND-60.051 SINTRAN III REAL TIME LOADER ==== | ==== ND-60.051 SINTRAN III REAL TIME LOADER ==== | ||
{{DocPreStart}} | |||
This manual describes the commands of the Real Time Loader. Written for experienced users. | This manual describes the commands of the Real Time Loader. Written for experienced users. | ||
72 Pages. | 72 Pages. | ||
{{DocPreEnd}} | |||
==== ND-60.057 THE DATA BASE SYSTEM SIBAS I USER'S MANUAL ==== | ==== ND-60.057 THE DATA BASE SYSTEM SIBAS I USER'S MANUAL ==== | ||
{{DocPreStart}} | |||
This manual describes original SIBAS system. It describes the implementation of a data base system, parameters, programming techniques and commands. Written for programmers and supervisors. | This manual describes original SIBAS system. It describes the implementation of a data base system, parameters, programming techniques and commands. Written for programmers and supervisors. | ||
SIBAS is replaced by SIBAS II, see ND-60.127. | SIBAS is replaced by SIBAS II, see {{ND-doc|60.127}}. | ||
370 Pages. | 370 Pages. | ||
{{DocPreEnd}} | |||
==== ND-60.058 NORD PLOT PACKAGE ==== | ==== ND-60.058 NORD PLOT PACKAGE ==== | ||
{{DocPreStart}} | |||
This manual documents the library routines in the Plot Package. The Plot Package is used to drive drum incremental plotters. Calls from FORTRAN, BASIC or MAC programs are described. Written for programmers. | This manual documents the library routines in the Plot Package. The Plot Package is used to drive drum incremental plotters. Calls from FORTRAN, BASIC or MAC programs are described. Written for programmers. | ||
46 Pages. | 46 Pages. | ||
{{DocPreEnd}} | |||
==== ND-60.060 NORD IDT DCT-2000 OPERATOR'S GUIDE ==== | ==== ND-60.060 NORD IDT DCT-2000 OPERATOR'S GUIDE ==== | ||
{{DocPreStart}} | |||
This manual is an operator's guide to the ND IDT DCT-2000 terminal. It describes local commands, starting up procedures and loading. | This manual is an operator's guide to the ND IDT DCT-2000 terminal. It describes local commands, starting up procedures and loading. | ||
25 Pages. | 25 Pages. | ||
{{DocPreEnd}} | |||
==== ND-60.061 NORD IDT 200-USER OPERATOR'S GUIDE ==== | ==== ND-60.061 NORD IDT 200-USER OPERATOR'S GUIDE ==== | ||
{{DocPreStart}} | |||
ND IDT 200-USER is a remote batch terminal used to connect to CDC Cyber/6000 series computers. This manual is an operator's guide and describes commands, start up procedures and batch processing. | ND IDT 200-USER is a remote batch terminal used to connect to [[Wikipedia:CDC Cyber|CDC Cyber]]/6000 series computers. This manual is an operator's guide and describes commands, start up procedures and batch processing. | ||
30 Pages. | 30 Pages. | ||
{{DocPreEnd}} | |||
==== ND-60.062 SINTRAN III SYSTEM DOCUMENTATION ==== | ==== ND-60.062 SINTRAN III SYSTEM DOCUMENTATION ==== | ||
{{DocPreStart}} | |||
This is the main documentation for SINTRAN III. Written for maintainer of the SINTRAN III software. | This is the main documentation for SINTRAN III. Written for maintainer of the SINTRAN III software. | ||
240 Pages. | 240 Pages. | ||
{{DocPreEnd}} | |||
==== ND-60.066 ND RELOCATING LOADER ==== | ==== ND-60.066 ND RELOCATING LOADER ==== | ||
{{DocPreStart}} | |||
This is a users guide and contains a general introduction to loading and descriptions of the NRL commands, overlay mechanism and the Binary Relocatable Format (BRF). Written for ND-10/100 programmers. | This is a users guide and contains a general introduction to loading and descriptions of the NRL commands, overlay mechanism and the Binary Relocatable Format (BRF). Written for ND-10/100 programmers. | ||
59 Pages. | 59 Pages. | ||
{{DocPreEnd}} | |||
==== ND-60.067 NORD IDT 3780 OPERATOR'S GUIDE ==== | ==== ND-60.067 NORD IDT 3780 OPERATOR'S GUIDE ==== | ||
{{DocPreStart}} | |||
The ND IDT 3780 is a remote batch terminal operating with IBM 360/370 systems. This manual describes start up and batch processing. It is written as a user guide describing procedures for NORD-20, NORD-10/20/100 stand alone systems and systems running SINTRAN III. | The ND IDT 3780 is a remote batch terminal operating with IBM [[Wikipedia:IBM System/360|360]]/[[Wikipedia:IBM System/370|370]] systems. This manual describes start up and batch processing. It is written as a user guide describing procedures for NORD-20, NORD-10/20/100 stand alone systems and systems running SINTRAN III. | ||
25 Pages. | 25 Pages. | ||
{{DocPreEnd}} | |||
==== ND-60.070 NORD IDT NTR USER'S GUIDE ==== | ==== ND-60.070 NORD IDT NTR USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
The ND IDT NTR is a program system for remote batch communication with a Univac 1100-series computer. This user's guide describes start up and running the system, features and commands. | The ND IDT NTR is a program system for remote batch communication with a [[Wikipedia:Univac 1100-series|Univac 1100-series]] computer. This user's guide describes start up and running the system, features and commands. | ||
40 Pages. | 40 Pages. | ||
{{DocPreEnd}} | |||
==== ND-60.071 NORD-10 BASIC COMPILER REFERENCE MANUAL ==== | ==== ND-60.071 NORD-10 BASIC COMPILER REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
This is the reference manual for BASIC programmers. It could be used as a self study guide. It describes the basics of programming and a complete description of all commands. No previous programming experience is needed. | This is the reference manual for BASIC programmers. It could be used as a self study guide. It describes the basics of programming and a complete description of all commands. No previous programming experience is needed. | ||
236 Pages. | 236 Pages. | ||
{{DocPreEnd}} | |||
==== ND-60.072 SINTRAN III REAL TIME LOADER SYSTEM DOCUMENTATION ==== | ==== ND-60.072 SINTRAN III REAL TIME LOADER SYSTEM DOCUMENTATION ==== | ||
{{DocPreStart}} | |||
This is a description of implementation of the Real Time Loader. It is written for system programmers, some familiarity with the SINTRAN III Real Time Loader is needed. | This is a description of implementation of the Real Time Loader. It is written for system programmers, some familiarity with the SINTRAN III Real Time Loader is needed. | ||
40 Pages. | 40 Pages. | ||
{{DocPreEnd}} | |||
==== ND-60.075 NORD-50 ASSEMBLER ==== | ==== ND-60.075 NORD-50 ASSEMBLER ==== | ||
{{DocPreStart}} | |||
This is a reference manual for NORD-50 assembler. It contains information about operating procedures, assembler directives, macro usage and external program representation. Included appendixes covers instruction tables, BRF directives and numerical opcodes. Written for users of the NORD-50 assembler. A detailed explanation of the instruction set is given in the | This is a reference manual for NORD-50 assembler. It contains information about operating procedures, assembler directives, macro usage and external program representation. Included appendixes covers instruction tables, BRF directives and numerical opcodes. Written for users of the NORD-50 assembler. A detailed explanation of the instruction set is given in the {{ND-doc|05.003}}. | ||
52 Pages. | 52 Pages. | ||
{{DocPreEnd}} | |||
==== ND-60.076 NORD-50 MONITOR USER'S GUIDE AND SYSTEM DOCUMENTATION ==== | ==== ND-60.076 NORD-50 MONITOR USER'S GUIDE AND SYSTEM DOCUMENTATION ==== | ||
{{DocPreStart}} | |||
This is a guide to the monitor and the architecture of the NORD-50. Chapter 1-3 covers the monitor and how to run NORD-50 programs. Available commands is covered, including commands reserved for the system supervisor. How to do file access and monitor calls is also included. Chapter 4-6 describes the monitor architecture. | This is a guide to the monitor and the architecture of the NORD-50. Chapter 1-3 covers the monitor and how to run NORD-50 programs. Available commands is covered, including commands reserved for the system supervisor. How to do file access and monitor calls is also included. Chapter 4-6 describes the monitor architecture. | ||
This manual is aimed to NORD-50 users. Additional recommended manuals are SINTRAN III Timesharing/Batch guide ND-60.132 and NORD-50 FORTRAN Reference Manual ND-60.095. | This manual is aimed to NORD-50 users. Additional recommended manuals are SINTRAN III Timesharing/Batch guide ND-60.132 and NORD-50 FORTRAN Reference Manual ND-60.095. | ||
92 Pages. | 92 Pages. | ||
{{DocPreEnd}} | |||
Continue here ... Page 52 (dscn0549.jpg) | Continue here ... Page 52 (dscn0549.jpg) | ||
==== ND-60.077 SIBINTER ==== | ==== ND-60.077 SIBINTER ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.078 DATA BASE THEORY AND DESIGN ==== | ==== ND-60.078 DATA BASE THEORY AND DESIGN ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.079 MEAS II - AN ANALOG PROGRAM SYSTEM FOR PROCESS CONTROL USER'S MANUAL ==== | ==== ND-60.079 MEAS II - AN ANALOG PROGRAM SYSTEM FOR PROCESS CONTROL USER'S MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.082 SINTRAN III-CORE USER'S GUIDE ==== | ==== ND-60.082 SINTRAN III-CORE USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.083 NORD-50 LOADER USER'S GUIDE ==== | ==== ND-60.083 NORD-50 LOADER USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.088 ND SCREEN HANDLING SYSTEM ==== | ==== ND-60.088 ND SCREEN HANDLING SYSTEM ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.091 NORD RPG II USER'S GUIDE ==== | ==== ND-60.091 NORD RPG II USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.092 ND-100 SINTRAN III SIMULA REFERENCE MANUAL ==== | ==== ND-60.092 ND-100 SINTRAN III SIMULA REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.093 NORD PROCESS I/O SOFTWARE GUIDE ==== | ==== ND-60.093 NORD PROCESS I/O SOFTWARE GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.094 NCT - NORD COLOUR TERMINAL USER'S GUIDE ==== | ==== ND-60.094 NCT - NORD COLOUR TERMINAL USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.095 NORD-50 FORTRAN REFERENCE MANUAL ==== | ==== ND-60.095 NORD-50 FORTRAN REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.096 MAC INTERACTIVE ASSEMBLY AND DEBUGGING SYSTEM USER'S GUIDE ==== | ==== ND-60.096 MAC INTERACTIVE ASSEMBLY AND DEBUGGING SYSTEM USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.097 DATABASE ADMINISTRATOR MODULE ==== | ==== ND-60.097 DATABASE ADMINISTRATOR MODULE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.098 NORD-50 BRF EDITOR ==== | ==== ND-60.098 NORD-50 BRF EDITOR ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.099 FLOCON USER'S GUIDE ==== | ==== ND-60.099 FLOCON USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.100 7750 VIP EMULATOR USER'S GUIDE ==== | ==== ND-60.100 7750 VIP EMULATOR USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.101 NORD DATA ENTRY SYSTEM REFERENCE MANUAL ==== | ==== ND-60.101 NORD DATA ENTRY SYSTEM REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.105 ND TPS GENERAL DESCRIPTION ==== | ==== ND-60.105 ND TPS GENERAL DESCRIPTION ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.106 REFERENCE TO UTILITY PROGRAMS FOR THE RPG II USER ==== | ==== ND-60.106 REFERENCE TO UTILITY PROGRAMS FOR THE RPG II USER ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.107 DATACON USERS GUIDE ==== | ==== ND-60.107 DATACON USERS GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.108 ND INDEXED SEQUENTIAL ACCESS METHOD REFERENCE MANUAL ==== | ==== ND-60.108 ND INDEXED SEQUENTIAL ACCESS METHOD REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.109 GPM - GENERAL PURPOSE MACRO GENERATOR ==== | ==== ND-60.109 GPM - GENERAL PURPOSE MACRO GENERATOR ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.110 SINTRAN III POSTMORTEM INVESTIGATOR'S GUIDE ==== | ==== ND-60.110 SINTRAN III POSTMORTEM INVESTIGATOR'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.111 ND TPS USER'S GUIDE ==== | ==== ND-60.111 ND TPS USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.112 SINTRAN III SYSTEM DOCUMENTATION APPENDIX A-DATA FIELDS ==== | ==== ND-60.112 SINTRAN III SYSTEM DOCUMENTATION APPENDIX A-DATA FIELDS ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.113 NORD-500 ASSEMBLER REFERENCE MANUAL ==== | ==== ND-60.113 NORD-500 ASSEMBLER REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.114 NORD IDT 3270 EMULATOR USER'S GUIDE ==== | ==== ND-60.114 NORD IDT 3270 EMULATOR USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.115 NORD COMPUTERS IN ADMINISTRATIVE DATA PROCESSING APPLICATIONS ==== | ==== ND-60.115 NORD COMPUTERS IN ADMINISTRATIVE DATA PROCESSING APPLICATIONS ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.117 PLANC REFERENCE MANUAL ==== | ==== ND-60.117 PLANC REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.121 PED USER'S GUIDE ==== | ==== ND-60.121 PED USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.122 NORD FILE SYSTEM - SYSTEM DOCUMENTATION ==== | ==== ND-60.122 NORD FILE SYSTEM - SYSTEM DOCUMENTATION ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.123 MSD SORT SYSTEM ==== | ==== ND-60.123 MSD SORT SYSTEM ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.124 ND-PASCAL USER'S GUIDE ==== | ==== ND-60.124 ND-PASCAL USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.125 SINTRAN III INTRODUCTION ==== | ==== ND-60.125 SINTRAN III INTRODUCTION ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.126 MAGTAPE-LISTER PROGRAM USER'S GUIDE ==== | ==== ND-60.126 MAGTAPE-LISTER PROGRAM USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.127 THE DATABASE SYSTEM SIBAS II USER'S MANUAL ==== | ==== ND-60.127 THE DATABASE SYSTEM SIBAS II USER'S MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.128 SINTRAN III REFERENCE MANUAL ==== | ==== ND-60.128 SINTRAN III REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.132 SINTRAN III TIMESHARING/BATCH GUIDE ==== | ==== ND-60.132 SINTRAN III TIMESHARING/BATCH GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.133 SINTRAN III REAL TIME GUIDE ==== | ==== ND-60.133 SINTRAN III REAL TIME GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.134 SINTRAN III COMMUNICATION GUIDE ==== | ==== ND-60.134 SINTRAN III COMMUNICATION GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.136 ND-500 LOADER/MONITOR ==== | ==== ND-60.136 ND-500 LOADER/MONITOR ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.137 FOCUS SCREEN HANDLING SYSTEM REFERENCE MANUAL ==== | ==== ND-60.137 FOCUS SCREEN HANDLING SYSTEM REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.140 7750 VIP EMULATOR II USER'S GUIDE ==== | ==== ND-60.140 7750 VIP EMULATOR II USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.141 SINTRAN III INTRODUKSJON ==== | ==== ND-60.141 SINTRAN III INTRODUKSJON ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.143 HASP-II WORK STATION USER'S GUIDE ==== | ==== ND-60.143 HASP-II WORK STATION USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.144 ND COBOL REFERENCE MANUAL ==== | ==== ND-60.144 ND COBOL REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.145 ND FORTRAN REFERENCE MANUAL ==== | ==== ND-60.145 ND FORTRAN REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.146 ND-SORT/MERGE SYSTEM ==== | ==== ND-60.146 ND-SORT/MERGE SYSTEM ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.148 PED BRUKERVEILEDNING ==== | ==== ND-60.148 PED BRUKERVEILEDNING ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.149 NOTIS-IR USER'S GUIDE ==== | ==== ND-60.149 NOTIS-IR USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.150 NOTIS-IR BRUKERVEILEDNING ==== | ==== ND-60.150 NOTIS-IR BRUKERVEILEDNING ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.151 SINTRAN III UTILITIES MANUAL ==== | ==== ND-60.151 SINTRAN III UTILITIES MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.152 ACCESS BRUKERVEILEDNING ==== | ==== ND-60.152 ACCESS BRUKERVEILEDNING ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.153 ACCESS USER GUIDE ==== | ==== ND-60.153 ACCESS USER GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.154 DATA ENTRY SYSTEM II NORSK VERSJON ==== | ==== ND-60.154 DATA ENTRY SYSTEM II NORSK VERSJON ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.158 SYMBOLIC DEBUGGER USER'S GUIDE ==== | ==== ND-60.158 SYMBOLIC DEBUGGER USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.159 UTS-400 EMULATOR USER GUIDE ==== | ==== ND-60.159 UTS-400 EMULATOR USER GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.160 HONEYWELL BULL REMOTE JOB ENTRY EMULATOR USER'S GUIDE ==== | ==== ND-60.160 HONEYWELL BULL REMOTE JOB ENTRY EMULATOR USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.161 PIOC SOFTWARE GUIDE ==== | ==== ND-60.161 PIOC SOFTWARE GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.162 DATA DICTIONARY SYSTEM REFERENCE MANUAL ==== | ==== ND-60.162 DATA DICTIONARY SYSTEM REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.163 COSMOS USER GUIDE ==== | ==== ND-60.163 COSMOS USER GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.165 DATA ENTRY SYSTEM II ==== | ==== ND-60.165 DATA ENTRY SYSTEM II ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.167 UNIQUE BRUKERHÅNDBOK ==== | ==== ND-60.167 UNIQUE BRUKERHÅNDBOK ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.169 UNIQUE USER MANUAL ==== | ==== ND-60.169 UNIQUE USER MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.170 APL USER GUIDE ==== | ==== ND-60.170 APL USER GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.171 COB-GEN REFERENCE MANUAL ==== | ==== ND-60.171 COB-GEN REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.173 VIRTUAL DISK DRIVE (VDD) SYSTEM DOCUMENTATION ==== | ==== ND-60.173 VIRTUAL DISK DRIVE (VDD) SYSTEM DOCUMENTATION ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.175 FILE-HANDLER USER'S MANUAL ==== | ==== ND-60.175 FILE-HANDLER USER'S MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.176 TRUE USER'S MANUAL ==== | ==== ND-60.176 TRUE USER'S MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.179 USER ENVIRONMET REFERENCE MANUAL ==== | ==== ND-60.179 USER ENVIRONMET REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.183 SOURCE COMPARE ==== | ==== ND-60.183 SOURCE COMPARE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.184 FILE COMPARE ==== | ==== ND-60.184 FILE COMPARE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.185 FOREIGN MEDIA ==== | ==== ND-60.185 FOREIGN MEDIA ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.186 FORTRAN CONVERTER ==== | ==== ND-60.186 FORTRAN CONVERTER ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.187 MERCUR FULLSKARMSHANTERING ANVÄNDARHANDBOK ==== | ==== ND-60.187 MERCUR FULLSKARMSHANTERING ANVÄNDARHANDBOK ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.188 MERCUR FULL SCREEN HANDLING USER GUIDE ==== | ==== ND-60.188 MERCUR FULL SCREEN HANDLING USER GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.189 ND/PC-LINK USER MANUAL ==== | ==== ND-60.189 ND/PC-LINK USER MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.190 INTRODUKSJON TIL ND-LINK ==== | ==== ND-60.190 INTRODUKSJON TIL ND-LINK ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.194 BRUKERMILJØ HÅNDBOK ==== | ==== ND-60.194 BRUKERMILJØ HÅNDBOK ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.195 ND TPS-II USER'S GUIDE ==== | ==== ND-60.195 ND TPS-II USER'S GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-60.196 BRF-LINKER USER MANUAL ==== | ==== ND-60.196 BRF-LINKER USER MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
=== 62 : software === | === 62 : software === | ||
==== ND-62.008 NORD-50 TEST SYSTEM ==== | ==== ND-62.008 NORD-50 TEST SYSTEM ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
=== 63 : NOTIS software === | === 63 : NOTIS software === | ||
| Line 979: | Line 986: | ||
==== ND-63.001 INTRODUCTION TO NOTIS-WP ==== | ==== ND-63.001 INTRODUCTION TO NOTIS-WP ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-63.002 NOTIS-WP REFERENCE MANUAL - EDITOR ==== | ==== ND-63.002 NOTIS-WP REFERENCE MANUAL - EDITOR ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-63.003 INTRODUKSJON TIL NOTIS-WP ==== | ==== ND-63.003 INTRODUKSJON TIL NOTIS-WP ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-63.004 NOTIS-WP HÅNDBOK - EDITOR ==== | ==== ND-63.004 NOTIS-WP HÅNDBOK - EDITOR ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-63.005 NOTIS-IR USER GUIDE ==== | ==== ND-63.005 NOTIS-IR USER GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-63.006 NOTIS-IR BRUKERVEILEDNING ==== | ==== ND-63.006 NOTIS-IR BRUKERVEILEDNING ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-63.007 NOTIS-TF REFERENCE MANUAL - TEXT FORMATTER ==== | ==== ND-63.007 NOTIS-TF REFERENCE MANUAL - TEXT FORMATTER ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-63.008 NOTIS-TF HÅNDBOK - TEKSTFORMATERER ==== | ==== ND-63.008 NOTIS-TF HÅNDBOK - TEKSTFORMATERER ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-63.009 NOTIS-TF MACRO GUIDE ==== | ==== ND-63.009 NOTIS-TF MACRO GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-63.010 NOTIS-TF MAKRO-VEILEDNING ==== | ==== ND-63.010 NOTIS-TF MAKRO-VEILEDNING ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-63.013 NOTIS-RG REFERENCE MANUAL ==== | ==== ND-63.013 NOTIS-RG REFERENCE MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-63.014 NOTIS-RG HÅNDBOK ==== | ==== ND-63.014 NOTIS-RG HÅNDBOK ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-63.025 NOTIS-CALC USER GUIDE ==== | ==== ND-63.025 NOTIS-CALC USER GUIDE ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-63.026 NOTIS-CALC BRUKERHÅNDBOK ==== | ==== ND-63.026 NOTIS-CALC BRUKERHÅNDBOK ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-63.033 NOTIS-BG USER MANUAL ==== | ==== ND-63.033 NOTIS-BG USER MANUAL ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-63.034 NOTIS-BG BRUKERVEILEDNING ==== | ==== ND-63.034 NOTIS-BG BRUKERVEILEDNING ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
== Reference cards == | == Reference cards == | ||
| Line 1,048: | Line 1,055: | ||
==== ND-99.001 COSMOS USER CARD ==== | ==== ND-99.001 COSMOS USER CARD ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-99.005 ND-100 INSTANT INSTRUCTION CODES ==== | ==== ND-99.005 ND-100 INSTANT INSTRUCTION CODES ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-99.006 NOTIS-WP REFERENCE CARD FOR TDV-2200/9-ND-NOTIS TERMINALS ==== | ==== ND-99.006 NOTIS-WP REFERENCE CARD FOR TDV-2200/9-ND-NOTIS TERMINALS ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-99.007 NOTIS-WP OPPSLAGSKORT FOR TDV-2200/9-ND-NOTIS TERMINALER ==== | ==== ND-99.007 NOTIS-WP OPPSLAGSKORT FOR TDV-2200/9-ND-NOTIS TERMINALER ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-99.008 NOTIS-WP REFERENCE CARD FOR FACIT-4420-ND-NOTIS TERMINALS ==== | ==== ND-99.008 NOTIS-WP REFERENCE CARD FOR FACIT-4420-ND-NOTIS TERMINALS ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-99.009 NOTIS-WP OPPSLAGSKORT FOR FACIT-4420-ND-NOTIS TERMINALER ==== | ==== ND-99.009 NOTIS-WP OPPSLAGSKORT FOR FACIT-4420-ND-NOTIS TERMINALER ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-99.010 NOTIS REFERENCE CARD FOR NON-NOTIS TERMINALS ==== | ==== ND-99.010 NOTIS REFERENCE CARD FOR NON-NOTIS TERMINALS ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-99.011 NOTIS OPPSLAGSKORT FOR IKKE-NOTIS TERMINALER ==== | ==== ND-99.011 NOTIS OPPSLAGSKORT FOR IKKE-NOTIS TERMINALER ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-99.016 ND-100 OPERATOR'S COMMUNICATION INSTRUCTION SURVEY ==== | ==== ND-99.016 ND-100 OPERATOR'S COMMUNICATION INSTRUCTION SURVEY ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
==== ND-99.020 SINTRAN III QUICK REFERENCE CARD ==== | ==== ND-99.020 SINTRAN III QUICK REFERENCE CARD ==== | ||
{{DocPreStart}} | |||
{{DocPreEnd}} | |||
== References and sources == | == References and sources == | ||
Revision as of 21:01, 18 December 2008
This is a compilation of documentation mentioned in the Norsk Data Documentation Catalogue. Links to online resources and references to where copies of the documentation recide should also be included. Known documentation locations is in the library list.
NORD-10 at CERN 1974
Manual numbering system
The numbering system consists of three number of the form ND-xx.yyy.zz where xx is the main subject, yyy is a sequential number and zz is the version number. A new version is a full manual replacing the old one. There is also revisions where one or more pages are replaced. Revisions is marked with a letters, starting with A.
Reference : Norsk Data Documentation Catalogue (ND-40.004.06) page 4-5
Documentation List
02 : PIOC hardware
ND-02.003 PIOC HARDWARE REFERENCE MANUAL
ND-02.004 PIOC HARDWARE REFERENCE MANUAL ND-865-867
05 : NORD-5, NORD-50, NORD-500 CPUs
ND-05.003 NORD-50 REFERENCE MANUAL
ND-05.007 NORD-50 FUNCTIONAL DESCRIPTION
ND-05.009 NORD-500 REFERENCE MANUAL
ND-05.010 INTRODUCTION TO ND-500
ND-05.011 ND-500 HARDWARE DESCRIPTION
ND-05.012 ND-500 MICROPROGRAMMING GUIDE
ND-05.013 ND-500 ARRAY PROCESSING FUNCTIONS
ND-05.015 ND-500/2 HARDWARE DESCRIPTION
ND-05.020 ND-5000 HARDWARE DESCRIPTION
06 : NORD-1, NORD-10, NORD-10/S, NORD-100 CPUs
ND-06.005 NORD-10/NORD-100 COMMUNICATION SYSTEM
ND-06.007 BIG MULTIPORT MEMORY SYSTEM
ND-06.008 NORD-10/S REFERENCE MAUAL
ND-06.009 NORD-10/S FUNCTIONAL DESCRIPTION
ND-06.010 NORD-10/S MICROPROGRAM
ND-06.012 NORD-10/S INPUT/OUTPUT SYSTEM
ND-06.014 ND-100 REFERENCE MANUAL
ND-06.015 ND-100 FUNCTIONAL DESCRIPTION
A copy is located on the Bitsavers website.
ND-06.016 ND-100 INPUT/OUTPUT SYSTEM
ND-06.017 ND-100 BACKPLANE
ND-06.018 ND-100 MICROPROGRAMMING
ND-06.020 INTRODUCTION TO ND-100
10 : Multiport 4 and 5 system
ND-10.003 TECHNICAL INTRODUCTION TO MULTIPORT 4
ND-10.004 MULTIPORT MEMORY 5 TECHNICAL DESCRIPTION
ND-10.006 MULTIPORT MEMORY CHANNEL SPECIFICATIONS
11 : Data storage equipment
ND-11.009 HAWK - DISK SYSTEM
ND-11.010 NORD-10/HAWK DISK CONTROLLER
ND-11.012 FLOPPY DISK SYSTEM
ND-11.013 NORD-10/S ERROR CORRECTION CONTROL (ECC) DISK CONTROLLER
ND-11.014 STC MAGTAPE SYSTEM
ND-11.015 FLOPPY DISK CONTROLLER - 3027
ND-11.016 8 INCH WINCHESTER DISK CONTROLLER ST506 & FINCH
Reference : ST506
ND-11.019 DUAL CHANNEL DISK SWITCH
ND-11.021 FLOPPY AND STREAMER CONTROLLER 3106/3112
12 : I/O Interfaces
ND-12.004 CAMAC CDMA NORD-10
ND-12.006 CAMAC CC-NORD-10 HARDWARE
ND-12.007 CAMAC CC-NORD-10 INTERFACE
ND-12.012 INTERFACE TO PERTEC MAGNETIC TAPE
ND-12.013 NORDCOM COLOUR TERMINAL
ND-12.015 1158 DR-11-C INTERFACE
ND-12.016 DATA COMMUNITATION
ND-12.018 HDLC INTERFACE
ND-12.020 UNIVERSAL DMA INTERFACE ND852
ND-12.023 GENERAL PURPOSE INTERFACE BUS (GPIB) USER'S GUIDE
ND-12.024 FACIT 4420/ND USERS GUIDE
13 : Miscelaneous hardware
ND-13.003 CIRCUIT DIAGRAM SYMBOLS
ND-13.012 NORD-10 POWER UNIT
ND-13.014 SITE PREPARATION AND INSTALLATION MANUAL
ND-13.015 PLANLEGGING OG INSTALLASJONSMANUAL
Mixed hardware/software
30 : Operating, diagnostic, maintenance
ND-30.001 NORD-10/NORD-50 OPERATOR'S GUIDE
ND-30.003 SINTRAN III System Supervisor
ND-30.004 NORD-10/S HARDWARE MAINTENANCE MANUAL
ND-30.005 TEST PROGRAM DESCRIPTIONS
ND-30.010 NORD-50 HARDWARE MAINTENANCE MANUAL
ND-30.013 TEST MICRO PROGRAM DESCRIPTION FOR ND-500
ND-30.014 ND-500 HARDWARE MAINTENANCE MANUAL
ND-30.018 TEST PROGRAM DESCRIPTION - ND-500
ND-30.020 ACCESS DBA HÅDBOK
ND-30.022 ACCESS DBA MANUAL
ND-30.024 SATELLITE INSTALLATION AND OPERATION GUIDE
ND-30.025 COSMOS OPERATORS GUIDE
ND-30.026 NORDRIFT - HÅNDBOK FOR DRIFTSOPERATØRER
ND-30.029 TEST MICROPROGRAM DESCRIPTIONS FOR ND-500/2
ND-30.030 ND TPS-II OPERATOR GUIDE
ND-30.031 ND-100 COMPACT OPERATOR GUIDE
ND-30.033 COSMOS X.21 OPTION OPERATOR GUIDE
ND-30.034 COSMOS X.25 OPTION OPERATOR GUIDE
ND-30.038 SNA 3270 TERMINAL EMULATOR OPERATOR GUIDE
40 : Miscellaneous
ND-40.004 Documentation Catalogue
ND-40.005 NORSK DATA GLOSSARY
50 : Hardware / software system description
No such manuals known.
Software
60-62 : General software
ND-60.031 QED USER MANUAL
ND-60.037 SCIENTIFIC SUBROUTINE PACKAGE
ND-60.041 NORD IDT GERTS-115 OPERATOR'S GUIDE
ND-60.046 TRACE ROUTINE
ND-60.047 NORD PL USER'S GUIDE
ND-60.051 SINTRAN III REAL TIME LOADER
ND-60.057 THE DATA BASE SYSTEM SIBAS I USER'S MANUAL
ND-60.058 NORD PLOT PACKAGE
ND-60.060 NORD IDT DCT-2000 OPERATOR'S GUIDE
ND-60.061 NORD IDT 200-USER OPERATOR'S GUIDE
ND-60.062 SINTRAN III SYSTEM DOCUMENTATION
ND-60.066 ND RELOCATING LOADER
ND-60.067 NORD IDT 3780 OPERATOR'S GUIDE
ND-60.070 NORD IDT NTR USER'S GUIDE
ND-60.071 NORD-10 BASIC COMPILER REFERENCE MANUAL
ND-60.072 SINTRAN III REAL TIME LOADER SYSTEM DOCUMENTATION
ND-60.075 NORD-50 ASSEMBLER
ND-60.076 NORD-50 MONITOR USER'S GUIDE AND SYSTEM DOCUMENTATION
Continue here ... Page 52 (dscn0549.jpg)
ND-60.077 SIBINTER
ND-60.078 DATA BASE THEORY AND DESIGN
ND-60.079 MEAS II - AN ANALOG PROGRAM SYSTEM FOR PROCESS CONTROL USER'S MANUAL
ND-60.082 SINTRAN III-CORE USER'S GUIDE
ND-60.083 NORD-50 LOADER USER'S GUIDE
ND-60.088 ND SCREEN HANDLING SYSTEM
ND-60.091 NORD RPG II USER'S GUIDE
ND-60.092 ND-100 SINTRAN III SIMULA REFERENCE MANUAL
ND-60.093 NORD PROCESS I/O SOFTWARE GUIDE
ND-60.094 NCT - NORD COLOUR TERMINAL USER'S GUIDE
ND-60.095 NORD-50 FORTRAN REFERENCE MANUAL
ND-60.096 MAC INTERACTIVE ASSEMBLY AND DEBUGGING SYSTEM USER'S GUIDE
ND-60.097 DATABASE ADMINISTRATOR MODULE
ND-60.098 NORD-50 BRF EDITOR
ND-60.099 FLOCON USER'S GUIDE
ND-60.100 7750 VIP EMULATOR USER'S GUIDE
ND-60.101 NORD DATA ENTRY SYSTEM REFERENCE MANUAL
ND-60.105 ND TPS GENERAL DESCRIPTION
ND-60.106 REFERENCE TO UTILITY PROGRAMS FOR THE RPG II USER
ND-60.107 DATACON USERS GUIDE
ND-60.108 ND INDEXED SEQUENTIAL ACCESS METHOD REFERENCE MANUAL
ND-60.109 GPM - GENERAL PURPOSE MACRO GENERATOR
ND-60.110 SINTRAN III POSTMORTEM INVESTIGATOR'S GUIDE
ND-60.111 ND TPS USER'S GUIDE
ND-60.112 SINTRAN III SYSTEM DOCUMENTATION APPENDIX A-DATA FIELDS
ND-60.113 NORD-500 ASSEMBLER REFERENCE MANUAL
ND-60.114 NORD IDT 3270 EMULATOR USER'S GUIDE
ND-60.115 NORD COMPUTERS IN ADMINISTRATIVE DATA PROCESSING APPLICATIONS
ND-60.117 PLANC REFERENCE MANUAL
ND-60.121 PED USER'S GUIDE
ND-60.122 NORD FILE SYSTEM - SYSTEM DOCUMENTATION
ND-60.123 MSD SORT SYSTEM
ND-60.124 ND-PASCAL USER'S GUIDE
ND-60.125 SINTRAN III INTRODUCTION
ND-60.126 MAGTAPE-LISTER PROGRAM USER'S GUIDE
ND-60.127 THE DATABASE SYSTEM SIBAS II USER'S MANUAL
ND-60.128 SINTRAN III REFERENCE MANUAL
ND-60.132 SINTRAN III TIMESHARING/BATCH GUIDE
ND-60.133 SINTRAN III REAL TIME GUIDE
ND-60.134 SINTRAN III COMMUNICATION GUIDE
ND-60.136 ND-500 LOADER/MONITOR
ND-60.137 FOCUS SCREEN HANDLING SYSTEM REFERENCE MANUAL
ND-60.140 7750 VIP EMULATOR II USER'S GUIDE
ND-60.141 SINTRAN III INTRODUKSJON
ND-60.143 HASP-II WORK STATION USER'S GUIDE
ND-60.144 ND COBOL REFERENCE MANUAL
ND-60.145 ND FORTRAN REFERENCE MANUAL
ND-60.146 ND-SORT/MERGE SYSTEM
ND-60.148 PED BRUKERVEILEDNING
ND-60.149 NOTIS-IR USER'S GUIDE
ND-60.150 NOTIS-IR BRUKERVEILEDNING
ND-60.151 SINTRAN III UTILITIES MANUAL
ND-60.152 ACCESS BRUKERVEILEDNING
ND-60.153 ACCESS USER GUIDE
ND-60.154 DATA ENTRY SYSTEM II NORSK VERSJON
ND-60.158 SYMBOLIC DEBUGGER USER'S GUIDE
ND-60.159 UTS-400 EMULATOR USER GUIDE
ND-60.160 HONEYWELL BULL REMOTE JOB ENTRY EMULATOR USER'S GUIDE
ND-60.161 PIOC SOFTWARE GUIDE
ND-60.162 DATA DICTIONARY SYSTEM REFERENCE MANUAL
ND-60.163 COSMOS USER GUIDE
ND-60.165 DATA ENTRY SYSTEM II
ND-60.167 UNIQUE BRUKERHÅNDBOK
ND-60.169 UNIQUE USER MANUAL
ND-60.170 APL USER GUIDE
ND-60.171 COB-GEN REFERENCE MANUAL
ND-60.173 VIRTUAL DISK DRIVE (VDD) SYSTEM DOCUMENTATION
ND-60.175 FILE-HANDLER USER'S MANUAL
ND-60.176 TRUE USER'S MANUAL
ND-60.179 USER ENVIRONMET REFERENCE MANUAL
ND-60.183 SOURCE COMPARE
ND-60.184 FILE COMPARE
ND-60.185 FOREIGN MEDIA
ND-60.186 FORTRAN CONVERTER
ND-60.187 MERCUR FULLSKARMSHANTERING ANVÄNDARHANDBOK
ND-60.188 MERCUR FULL SCREEN HANDLING USER GUIDE
ND-60.189 ND/PC-LINK USER MANUAL
ND-60.190 INTRODUKSJON TIL ND-LINK
ND-60.194 BRUKERMILJØ HÅNDBOK
ND-60.195 ND TPS-II USER'S GUIDE
ND-60.196 BRF-LINKER USER MANUAL
62 : software
ND-62.008 NORD-50 TEST SYSTEM
63 : NOTIS software
Page 73 (dscn0570.jpg)
ND-63.001 INTRODUCTION TO NOTIS-WP
ND-63.002 NOTIS-WP REFERENCE MANUAL - EDITOR
ND-63.003 INTRODUKSJON TIL NOTIS-WP
ND-63.004 NOTIS-WP HÅNDBOK - EDITOR
ND-63.005 NOTIS-IR USER GUIDE
ND-63.006 NOTIS-IR BRUKERVEILEDNING
ND-63.007 NOTIS-TF REFERENCE MANUAL - TEXT FORMATTER
ND-63.008 NOTIS-TF HÅNDBOK - TEKSTFORMATERER
ND-63.009 NOTIS-TF MACRO GUIDE
ND-63.010 NOTIS-TF MAKRO-VEILEDNING
ND-63.013 NOTIS-RG REFERENCE MANUAL
ND-63.014 NOTIS-RG HÅNDBOK
ND-63.025 NOTIS-CALC USER GUIDE
ND-63.026 NOTIS-CALC BRUKERHÅNDBOK
ND-63.033 NOTIS-BG USER MANUAL
ND-63.034 NOTIS-BG BRUKERVEILEDNING
Reference cards
99 : All reference cards
Page 79 (dscn0576.jpg)
ND-99.001 COSMOS USER CARD
ND-99.005 ND-100 INSTANT INSTRUCTION CODES
ND-99.006 NOTIS-WP REFERENCE CARD FOR TDV-2200/9-ND-NOTIS TERMINALS
ND-99.007 NOTIS-WP OPPSLAGSKORT FOR TDV-2200/9-ND-NOTIS TERMINALER
ND-99.008 NOTIS-WP REFERENCE CARD FOR FACIT-4420-ND-NOTIS TERMINALS
ND-99.009 NOTIS-WP OPPSLAGSKORT FOR FACIT-4420-ND-NOTIS TERMINALER
ND-99.010 NOTIS REFERENCE CARD FOR NON-NOTIS TERMINALS
ND-99.011 NOTIS OPPSLAGSKORT FOR IKKE-NOTIS TERMINALER
ND-99.016 ND-100 OPERATOR'S COMMUNICATION INSTRUCTION SURVEY
ND-99.020 SINTRAN III QUICK REFERENCE CARD
References and sources
- Norsk Data Document ND–40.004 Documentation Catalogue (ND-40.004.06)