ND floppy disks: Difference between revisions

From NDWiki
Jump to navigation Jump to search
(floppy table update, more columns)
m (Fiddled a bit with the table layout)
Line 41: Line 41:
|-
|-
| 17b || Non IBM || 1024 bytes/sector || 8 || 77 || DS/DD
| 17b || Non IBM || 1024 bytes/sector || 8 || 77 || DS/DD
|}
'''Additional formats only handled by the 3106 card:'''
{| class="wikitable"
|-
|-
!Additional
! Format !! Identification !! Sector size !! Sectors/t !! Tracks/s !! Sides/Density
!formats
!only handled
!by the
!3106
!card:
|-
|-
| 20b || - || || || ||
| 20b || - || || || ||

Revision as of 14:43, 28 August 2009

ND Floppy Disk format

Norsk Data floppy disks were originally only 8", but this later changed to 5 1/4". Newer systems would come with a dual 8" and 5 1/4" unit, and all ND software (e.g. SINTRAN-III and patch updates) were delivered on 5 1/4" floppies after the introduction of the smaller drives.

Both the 8" and in particular the 5 1/4" controllers could support a number of formats.

Formats supported by the 3106 and 3112 floppy and streamer controllers:

Format Identification Sector size Sectors/t Tracks/s Sides/Density
0b IBM SYS-32-II 512 bytes/sector 8 77 SS/SD
1b IBM 3600 256 bytes/sector SS/SD
2b IBM 3740[1] 128 bytes/sector 26 77 SS/SD
3b -
4b Non IBM 512 bytes/sector DS/SD
5b Non IBM 256 bytes/sector DS/SD
6b Non IBM 128 bytes/sector DS/SD
7b -
10b Non IBM 512 bytes/sector SS/SD
11b IBM SYS-34 256 bytes/sector SS/DD
12b -
13b Non IBM 1024 bytes/sector SS/DD
14b Non IBM 512 bytes/sector DS/DD
15b IBM SYS-34 256 bytes/sector DS/DD
16b -
17b Non IBM 1024 bytes/sector 8 77 DS/DD

Additional formats only handled by the 3106 card:

Format Identification Sector size Sectors/t Tracks/s Sides/Density
20b -
21b -
22b Basic 5 1/4" 128 bytes/sector SS/SD
23b - 33b -
34b IBM PC[2] 512 bytes/sector 15 80 DS/DD
35b - 57b -
60b - 67b User specified

Format identification numbers

The format identification number in the left column of the table was used to switch the floppy disk controller to the desired format before use, e.g. via the Sintran command DEVICE-FUNCTION.

Standard Norsk Data formats

The standard Norsk Data formats floppies were format 0b for 8" floppies and format 17b for 5 1/4" floppies. Only formats 0b and 17b could be used for a Sintran III file system. The other formats could be used as e.g. a volume for the backup-system application (i.e. as a sequential medium, like a tape drive), or to support a foreign floppy disk format. Examples of the latter could be CP/M (8" single sided, single density, 128 bytes/sector, format 2b), or standard 80-track IBM PC 5 1/4" 1.25MB floppies (format 34b). None of the non-ND formats had built-in filesystem support in Sintran, so to read or write CP/M or IBM PC floppy disks the user would need to acquire or write specific software for it.

Details of the default 8" and 5 1/4" formats

8" format

The 8" Norsk Data format 0b was 512 bytes/sector, single sided/single density, 8 sectors per track, 77 tracks. The total capacity was 154 pages of 2048 bytes per page. Of this 148 pages could be allocated for files.

5 1/4" format

The 5 1/4" Norsk Data format 17b was 1024 bytes/sector, double sided/double density, 8 sectors per track, 77 tracks. The total capacity was 616 pages. Of this 612 pages could be allocated for files.

The floppy controller could use any of its supported formats on any media, 8" or 5 1/4", so it is also possible to have a format 17b 8" floppy disk. This became feasible when media with higher density became available.

Reading a Norsk Data floppy on a Linux computer

A Linux computer equipped with a 5 1/4" floppy disk controller can read a Norsk Data floppy of format 17b. To do this the setfdprm tool is needed, which can be found in either the fdutils package or the util-linux package, depending on distribution. The version should be 5.2 or newer.[3]

  • Insert the floppy disk
  • Close the lever arm
  • Enter the following command (as user root):
setfdprm /dev/fd0 sect=8 hd ssize=1024 cyl=77
  • The floppy can now be read with the following command:
dd if=/dev/fd0 bs=2048 count=616 of=file.image
  • Do not use the 'cat' command.
  • The setfdprm command must be repeated whenever a new floppy disk is inserted.
  • The floppy content will be found in the file.image file, or whatever output file defined by the of= parameter to the dd command.

The format of the image data will normally be either a standard Sintran file system, or a backup volume. The Sintran file system is documented in Norsk Data Document ND–30.003 SINTRAN III System Supervisor .

References

  1. ↑ http://www.bitsavers.org/pdf/terak/terak.8510.description.pdf
  2. ↑ http://www.reference.com/browse/IBM+PC+AT
  3. ↑ http://fdutils.linux.lu/disk-id.html

Norsk Data Document ND–30.003 SINTRAN III System Supervisor
Norsk Data Document ND–11.015 FLOPPY DISK CONTROLLER - 3027
Norsk Data Document ND–11.021 FLOPPY AND STREAMER CONTROLLER 3106/3112

Retrieved from "https://www.ndwiki.org/index.php?title=ND_floppy_disks&oldid=1232"