|
|
| Line 42: |
Line 42: |
| The next part covers the 27 tests contained on the test floppy 2, ND-10325B. The last part covers the tests on the test floppy 3, ND-10326B. | | The next part covers the 27 tests contained on the test floppy 2, ND-10325B. The last part covers the tests on the test floppy 3, ND-10326B. |
| The manual is written for maintenance personnel working on ND-100 or NORD-10 systems. | | The manual is written for maintenance personnel working on ND-100 or NORD-10 systems. |
| | |
| 250 Pages. | | 250 Pages. |
| | |
| | Versions : |
| | revision 06A |
| | {{DocPreEnd}} |
| | |
| | ==== ND-30.005 Test Program Description for ND-100/ND-110 ==== |
| | {{DocPreStart}} |
| | This manual seems to be a reworked version of the ND-30.005 TEST PROGRAM DESCRIPTIONS. It describes the test programs used on ND-100/ND-110 computers. The manual consists of three parts. The first chapter contains a detailed description of the TPE-monitor. Chapter 2-20 describes the test programs and the last chapter describes the utility programs. |
| | The manual is written for maintenance personnel working on ND-100 or ND-110 systems. |
| | |
| | 253 Pages. |
| | |
| | Versions : |
| | revision 1 March 1983 Preliminary |
| | revision 2 April 1983 |
| | revision 3 March 1987 |
| {{DocPreEnd}} | | {{DocPreEnd}} |
|
| |
|
This is a compilation of documentation about software mentioned in the Norsk Data Documentation Catalogue. Links to online resources and references to where copies of the documentation recide should also be included.
Known documentation locations is in the library list.
Documentation List
30 : Operating, diagnostic, maintenance
ND-30.001 NORD-10/NORD-50 OPERATOR'S GUIDE
This is an introduction to operation and daily maintaining of NORD-10/S and NORD/50 systems. Written for daily operation of the system.
134 Pages.
ND-30.003 SINTRAN III System Supervisor
This manual is a guide for system supervisors administering data centers. Written for daily operation of the system. It contains information on how to start various hardware, doing warm start, managing disk space, making backups, managing users, ...
It also contains a chapter on loading and using test programs.
Appendix C contains a list of device names.
Appendix D contains an example of a disk layout.
Appendix E contains the system layout of physical memory.
Appendix F and G contains the logical and physical layout of the disk system.
Appendix K contains information of how to set the thumbwheel on the ND-100 CPU ALD and for the address and baudrate of 8-terminal interface cards (3013).
300 Pages.
Versions :
revision 06A
revision 07 420 pages
Availability : Göran have original, not scanned yet. (ND-30.003.06A, ND-30.003.07 EN)
ND-30.004 NORD-10/S HARDWARE MAINTENANCE MANUAL
Written for field service engineers, this manual covers topics as technical description and physical layout of the CPU, memory and I/O system, hardware maintenance, module substitution, error symptoms, troubleshooting. Hardware covered is the CPU, memory, power system, DMA controllers and character devices.
200 Pages.
ND-30.005 TEST PROGRAM DESCRIPTIONS
This manual describes the test programs used on ND-100, NORD-10/S, NORD-10 and NORD-12 computers. The manual consists of three parts. The first part contains a detailed description of the FLOPPY MONITOR and the TEST PROGRAM MONITOR. 15 chapters describes the 15 tests contained on the test floppy 1, ND-10324E, the most commonly used tests.
The next part covers the 27 tests contained on the test floppy 2, ND-10325B. The last part covers the tests on the test floppy 3, ND-10326B.
The manual is written for maintenance personnel working on ND-100 or NORD-10 systems.
250 Pages.
Versions :
revision 06A
ND-30.005 Test Program Description for ND-100/ND-110
This manual seems to be a reworked version of the ND-30.005 TEST PROGRAM DESCRIPTIONS. It describes the test programs used on ND-100/ND-110 computers. The manual consists of three parts. The first chapter contains a detailed description of the TPE-monitor. Chapter 2-20 describes the test programs and the last chapter describes the utility programs.
The manual is written for maintenance personnel working on ND-100 or ND-110 systems.
253 Pages.
Versions :
revision 1 March 1983 Preliminary
revision 2 April 1983
revision 3 March 1987
ND-30.010 NORD-50 HARDWARE MAINTENANCE MANUAL
Written for field service engineers working on NORD-5 systems. This manual covers topics as the racks and operators panel, the NORD-50 monitor, error messages, test program information, memory, expansion memory and the power system.
eneral knowledge of NORD-10/S hardware and SINTRAN III are required.
200 Pages.
ND-30.013 TEST MICRO PROGRAM DESCRIPTION FOR ND-500
Written for field service engineers and personnel testing ND-500 CPUs. It describes the test programs used for testing the CPU and the procedure for their implementation.
116 Pages.
ND-30.014 ND-500 HARDWARE MAINTENANCE MANUAL
Written for field service engineers.
Not available at printing time.
ND-30.018 TEST PROGRAM DESCRIPTION - ND-500
This manual describes the ND-500 DESMODUR verification system. It is written in two parts. Part one describes the various tests to verify ND-500 microcode and hardware. Part two gives a description on how to extend with new test programs.
108 Pages.
ND-30.020 ACCESS DBA HÅDBOK
This is a Norwegian version of the ACCESS DBA Manual, ND-30.022
55 Pages.
ND-30.022 ACCESS DBA MANUAL
This is the reference manual for Data Base Administrator for an ACCESS system.
90 Pages.
ND-30.024 SATELLITE INSTALLATION AND OPERATION GUIDE
This manual replaces an earlier version, ND-30.024 ND SATELLITE SYSTEM. It guides in the steps from unpacking to using the machine. It describes installation, connecting terminals and printers, loading the operation system, maintenancy and backup. It is written for the local supervisor of the system.
70 Pages.
ND-30.025 COSMOS OPERATORS GUIDE
This manual replaces an earlier version, ND-30.025 COSMOS System Supervisor. It contains a guide to install and operate the network facilities of COSMOS Basic Module (ND 10374) and IS XMSG (ND 10373). Written for system and network supervisors.
100 Pages.
ND-30.026 NORDRIFT - HÅNDBOK FOR DRIFTSOPERATØRER
This is the Norwegian version of the Operator's Guide for TPS-II. It documents the ND 10342 ND Transaction Processing System - TPS-II. Written for operators of TPS-II operators.
110 Pages.
ND-30.029 TEST MICROPROGRAM DESCRIPTIONS FOR ND-500/2
This manual gives a short introduction to ND-500/2 microprograming and usage of available test microprograms. It includes instructions on how to start the ND-50/2 test microprograms. Written for production and service personnel or people wanting to write their own microrogram testing routines.
110 Pages.
ND-30.030 ND TPS-II OPERATOR GUIDE
This manual describes the ND 10342 ND Transaction Processing System - TPS-II. It contains all information needed to run a system based on TPS-II. Written for operators of TPS-II systems.
105 Pages.
ND-30.031 ND-100 COMPACT OPERATOR GUIDE
This is a practical guide for operators of the ND-100 Compact computer. It contains a description of the operator's panel, how to start the computer, how to use the floppy and tape streamer, making backups and how to handle some simple errors.
54 Pages.
ND-30.033 COSMOS X.21 OPTION OPERATOR GUIDE
This manual describes the ND-10403 COSMOS X.21 Option. Written for system operators.
60 Pages.
ND-30.034 COSMOS X.25 OPTION OPERATOR GUIDE
This manual describes the ND-10573 COSMOS X.25 Option. It contains two parts, the first gives the procedures for starting up and operating the COSMOS X.25 network system. The second part contains reference information about the functions from the first part and aditional advanced functions. Written for system operators.
110 Pages.
ND-30.038 SNA 3270 TERMINAL EMULATOR OPERATOR GUIDE
This manual describes the ND-10741 SNA Gateway Single Line and ND-10742 SNA Terminal Emulator. It contains an introduction to the ND SNA Emulator, how it is implemented and started, the operation of the system, differences between the ND 246 NOTIS keyboard and the IBM 3270 keyboard. Written for operators and other personnel using the ND 246 NOTIS terminal.
50 Pages.
40 : Miscellaneous
ND-40.004 Documentation Catalogue
This is a list of how ND documentation is connected, what different manuals there is and a short description of the content. In the end there is a price list and instructions on how to order manuals.
90 Pages.
ND-40.005 NORSK DATA GLOSSARY
This is a glossary over terms used in ND manuals. ND abbreviations are also listed. Some common computer terms are also explained.
Not available at printing time.
50 : Hardware / software system description
No such manuals known.
References and sources
