SET (command): Difference between revisions

Latest revision as of 08:34, 21 August 2017

@SET <program>, <number of time units>,

Enter an RT program in the time queue to be transferred to the execution queue after a specified amount of time.

<program>: default = own terminal background program) RT program name or RT description address (octal).
<number of time units>: the number of time units the program is to stay in the time queue.
: time units. 1 = basic time unit (normally 20 milliseconds), 2 = seconds, 3 = minutes, 4 = hours.

Rules:

Permitted only for users RT and SYSTEM.
If the program is already in the time queue, it is removed and reinserted according to the new specifications.
If a program is put in the time queue by @SET, clock adjustment (@CLADJ) does not affect waiting time.

Example:

@SET KLOKK 5,3

The RT program KLOKK will be set up for execution in 5 minutes.

Norsk Data Document ND–60.050.06 SINTRAN III USERS GUIDE section 5.5

Norsk Data Document ND–60.128.01 SINTRAN III REFERENCE MANUAL (printed June 1980), pages 1-140, 1-141

Norsk Data Document ND–60.128.03 SINTRAN III REFERENCE MANUAL (printed February 1983), page 1-180

Norsk Data Document ND–60.174.Q01 SINTRAN III QUICK REFERENCE CARD

@@ Line 7: / Line 7: @@
 Rules:
 #Permitted only for users RT and SYSTEM.
-#If the program is already in the time queue, it is removed and inserted again according to the new specifications.
+#If the program is already in the time queue, it is removed and reinserted according to the new specifications.
-#If a program is put in the time queue by @SET, and adjustment of the clock (@[[CLADJ (command)|CLADJ]]) has no influence on the waiting time.
+#If a program is put in the time queue by @SET, clock adjustment (@[[CLADJ (command)|CLADJ]]) does not affect waiting time.
 Example: