ND-110 Satellite 9883.21238: Difference between revisions
(Add page for ND 110 Satellite, serial 21238 (machine donated by Gandalf)) |
(T9 upgrades) |
||
Line 21: | Line 21: | ||
DISK: 228-1940 | DISK: 228-1940 | ||
</pre> | </pre> | ||
The disk itself has label '228-319' though, so it | The disk itself has label '228-319' though, so it is likely that this is a replacement/upgrade disk. | ||
The ND 9883 models are also known as '''T9''', and like the '''T17''' model they were originally spec'ed with 125MB disks. But this one has a 170MB disk as well as an additional terminal board, an Ethernet II board, and an HDLC board (so that all positions are now in use in this particular system). In that sense this T9 system has been upgraded to a T17 system (due to the extra terminal board), with larger disk and extra communication. | |||
=== Operating system version === | === Operating system version === |
Revision as of 10:53, 31 August 2016
Configuration
- Hard disk: 170 MB Micropolis SCSI disk, SE 50pin, ND designation ND 10 62 80
- Floppy: 1.2MB 5.25" floppy, model TBD
- Tape streamer: Tandberg TDC 3640, ND designation ND 11 02 17, serial number 379392
- Slot 1: 3013 ND100 8-TERM I/F, print: L, eco: N
- Slot 2: 3094 ETHERNET IF. II - print: E, eco: G
- Slot 3: 3095 ND110 CPU&MM 48B, print: B, eco: H, 39.3216 MHz crystal
- Slot 4: 3201 SCSI/FLOPPY, print: B, eco: K
- Slot 5: 3042 ND100 2 MBYTE RAM, print: B, eco: D
- Slot 6: 3015 ND100 HDLC W/A.LO. print: S, eco: U (TBC)
- Slot 7: 3013 ND100 8-TERM I/F, print: L, eco: N
Power Supply
- Wiener DN 03, 390 W
Labels
SYSTEM 9883.21238 FLOPPY: 187-3784 STREAMER: 229-1282 DISK: 228-1940
The disk itself has label '228-319' though, so it is likely that this is a replacement/upgrade disk. The ND 9883 models are also known as T9, and like the T17 model they were originally spec'ed with 125MB disks. But this one has a 170MB disk as well as an additional terminal board, an Ethernet II board, and an HDLC board (so that all positions are now in use in this particular system). In that sense this T9 system has been upgraded to a T17 system (due to the extra terminal board), with larger disk and extra communication.
Operating system version
Currently unknown
TODO
- Image the SCSI disk before attempting a boot
The disk, if working, should contain a version of SINTRAN III. But the system password is presumably unknown, so in addition to getting a backup of the disk, imaging it will also get access to the password.
- Check the power supply condition, start with the test measuring points