NORD-50

This article is a stub. You can improve NDWiki by expanding it.

The NORD-50 computer system is a completely integrated system of NORD-10/S and NORD-50 CPUs. The I/O system, file system and operating system are common to both processors.

The NORD-50 CPU is designed to be a fast floating point processor which is a total slave to the NORD-10/S.

NORD-50 does not have an I/O system or interrupt system by itself. This implies that NORD-10/S submits jobs to NORD-50 for execution in batches and acts as a system supervisor running the operating system SINTRAN III/VS and the NORD-50 monitor.

In a NORD-50 computer system, the NORD-10/S has the following functions:

• Supervision and synchronization of the NORD-50s in the system.
• Running the operating system, SINTRAN III.
• Generating NORD-50 executable machine code via NORD-50 assembler or FORTRAN compiler.
• Being the I/O system for the NORD-50s performing I/O transfer to / from the NORD-50 memory.

The NORD-50s in the system perform execution of instructions with data supplied through the NORD-10/S I/O system from byte oriented devices such as terminals, general DMA devices such as disks and magnetic tapes, the universal DMA interface, and special high-speed DMA channels connected directly to ports in the multiport memory system.

The system architecture is such that NORD-50s can have their private memories including a high speed static memory in addition to the multiport memory system.

The NORD-50s themselves do not perform any tasks except for running the application programs.

The slave processor NORD-50 is activated by the NORD-10/S and NORD-50 executes programs in parallel with the activities in NORD-10/S. The NORD-10/S is interrupted when the NORD-50 comes to an end of its tasks.

CPU

The NORD-50 CPU has a word length of 32 bits.

Address space

The NORD-50 has a 4 megabytes physical address space.

Performance

Whetstone results

MWIPS	MWIPS double precision	Language	Date
0.531	0.451	Fortran	1975